Equivalent shell element for passenger ship structural design

Thumbnail Image

Files

isbn9789526405322.pdf (4.76 MB)

URL

Journal Title

Journal ISSN

Volume Title

School of Engineering | Doctoral thesis (article-based) | Defence date: 2021-10-22
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.

Authors

Date

2021

Department

Konetekniikan laitos
Department of Mechanical Engineering

Major/Subject

Mcode

Degree programme

Language

en

Pages

94 + app. 94

Series

Aalto University publication series DOCTORAL DISSERTATIONS, 133/2021

Abstract

Predicting the global and local static and vibration response of a modern passenger ship is a challenging task, with major reliability and economic consequences if something goes wrong. Therefore, an accurate but computationally light calculation method is already needed in the early design phases when most of the important decisions are made. Currently, the ship's global response is investigated using a coarse mesh global Finite Element (FE) model, in which the mesh size equals the web-frame spacing. Girders are modelled with off-set beam elements and stiffeners together with plating using equivalent elements. Since the available equivalent elements do not or only partly consider the bending properties of the stiffened panel, the local response needs to be analysed separately using time-consuming sub-modelling technique. The objective of this thesis is to overcome the named limitations by introducing a more advanced equivalent element technique. The stiffened panel can be considered as a three-layer laminate shell element, where the first layer represents the plate, the second layer the stiffener web and the third layer the stiffener flange. The element follows Equivalent Single Layer (ESL) First-order Shear Deformation Theory (FSDT). It includes membrane, membrane-bending, bending, and out-of-plane shear stiffness, the constitutive properties of which are found through a homogenisation process. This enables significant computational savings in design and further in the optimisation problem, as layer-wise formulation enables stiffened panel scantlings to be changed without remeshing the model, as well as accurate assessment of the stresses. However, for certain local engineering problems, this simplification is limited, since due to homogenisation process the local plate bending between the stiffeners is neglected. In static analysis the superposition principle can be used to fix the homogenised mean stress field with local oscillations resulting from the periodic structure. In vibration analysis, due to interaction of modes, more advanced correction is needed. For smaller panel-level problems, a single-degree-of-freedom spring-mass system-based solution is presented. For a larger structure, in which bulkheads, pillars, and girders are included, a kinetic and strain energy-based method is presented. The ranges of validity of the equivalent element with and without the additional local corrections have been defined and discussed. The case studies presented in this thesis focused on passenger ship structures, but the element can also be utilised for other ship types or large complex structures where fine mesh analysis is not justified.

Description

Supervising professor

Romanoff, Jani, Prof., Aalto University, Department of Mechanical Engineering, Finland

Thesis advisor

Remes, Heikki, Prof., Aalto University, Finland

Keywords

equivalent element, equivalent single layer (ESL) theory, homogenisation, passenger ship, structural design, global finite element model, stiffened panel, static response, vibration response

Other note

Parts

  • [Publication 1]: Avi, Eero; Lillemäe, Ingrit; Romanoff, Jani; Niemelä, Ari. 2015. Equivalent shell element for ship structural design. Journal of Ship and Offshore Structures, volume 20, issue 3, pages 239-255.
    DOI: 10.1080/17445302.2013.819689 View at publisher
  • [Publication 2]: Avi Eero; Laakso, Aleksi; Romanoff, Jani; Lillemäe, Ingrit. 2015. Simplified method for natural frequency analysis of stiffened panel, Analysis and Design of Marine Structures - Proceedings of the 5th International Conference on Marine Structures, MARSTRUCT 2015, pages pp.107-114
  • [Publication 3]: Laakso, Aleksi; Avi, Eero; Romanoff, Jani. 2019. Correction of local deformations in free vibration analysis of ship deck structures by equivalent single layer elements, Ship and Offshore Structures, volume 14, issue 1, pages 135-147.
    Full text in Acris/Aaltodoc: http://urn.fi/URN:NBN:fi:aalto-201904022533
    DOI: 10.1080/17445302.2018.1561173 View at publisher
  • [Publication 4]: Raikunen, Joni; Avi, Eero; Remes, Heikki; Romanoff, Jani; Lillemäe-Avi, Ingrit, Niemelä, Ari. 2019. Optimisation of passenger ship structures in concept design stage, Ship and Offshore Structures, volume 14, issue 1, pages 320-334.
    Full text in Acris/Aaltodoc: http://urn.fi/URN:NBN:fi:aalto-201908154821
    DOI: 10.1080/17445302.2019.1590947 View at publisher
  • [Publication 5]: Avi Eero; Laakso, Aleksi; Romanoff, Jani; Remes, Heikki; Lillemäe-Avi, Ingrit. 2021. Coarse mesh finite element model for cruise ship global and local vibration analysis, Marine Structures, volume 79, 103053.
    Full text in Acris/Aaltodoc: http://urn.fi/URN:NBN:fi:aalto-202108258367
    DOI: 10.1016/j.marstruc.2021.103053 View at publisher

Citation

Permanent link to this item

https://urn.fi/URN:ISBN:978-952-64-0532-2

Collections

[diss] Insinööritieteiden korkeakoulu / ENG