Open Source Waste Plastic Granulator
Loading...
Access rights
openAccess
publishedVersion
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Date
2019-12
Major/Subject
Mcode
Degree programme
Language
en
Pages
21
Series
Technologies, Volume 7, issue 4
Abstract
In order to accelerate deployment of distributed recycling by providing low-cost feed stocks of granulated post-consumer waste plastic, this study analyzes an open source waste plastic granulator system. It is designed, built, and tested for its ability to convert post-consumer waste, 3D printed products and waste into polymer feedstock for recyclebots of fused particle/granule printers. The technical specifications of the device are quantified in terms of power consumption (380 to 404 W for PET and PLA, respectively) and particle size distribution. The open source device can be fabricated for less than $2000 USD in materials. The experimentally measured power use is only a minor contribution to the overall embodied energy of distributed recycling of waste plastic. The resultant plastic particle size distributions were found to be appropriate for use in both recyclebots and direct material extrusion 3D printers. Simple retrofits are shown to reduce sound levels during operation by 4dB-5dB for the vacuum. These results indicate that the open source waste plastic granulator is an appropriate technology for community, library, maker space, fab lab, or small business-based distributed recycling.Description
Keywords
3D printing, additive manufacturing, distributed manufacturing, distributed recycling, granulator, shredder, open hardware, fab lab, open-source, polymers, recycling, waste plastic, extruder, upcycle, circular economy, ACRYLONITRILE-BUTADIENE-STYRENE, EXTRUSION SYSTEM, POLYMER, REPRAP, POLYETHYLENE, LOOP
Other note
Citation
Ravindran, A, Scsavnicki, S, Nelson, W, Gorecki, P, Franz, J, Oberloier, S, Meyer, T K, Barnard, A R & Pearce, J M 2019, ' Open Source Waste Plastic Granulator ', Technologies, vol. 7, no. 4, 74 . https://doi.org/10.3390/technologies7040074