Implementation of highly configurable elevator car model to factory production
No Thumbnail Available
URL
Journal Title
Journal ISSN
Volume Title
School of Engineering |
Master's thesis
Checking the digitized thesis and permission for publishing
Instructions for the author
Instructions for the author
Authors
Date
2013
Department
Major/Subject
Koneensuunnitteluoppi
Mcode
Kon-41
Degree programme
Language
en
Pages
117 + [10]
Series
Abstract
The demand for mass customization products is creating challenges for mechanical design nowadays. In KONE, this is shown by the increasingly more variable pre-engineered products that are to be created. In product structures there are components that are either variable or fixed. The maintenance of these kinds of structures should be feasible in both PDM and CAD systems. In addition, it should be possible to automatically create order specific manufacturing data and support custom order engineering. The purpose of this thesis is to find ways to improve the methods used in KONE in order to have high quality 3D models and product structures, which are easy to modify and maintain in both PDM and CAD. The challenge here is to efficiently combine the configuration of a bill of material with fixed and variable items together with feasible 3D models and documentation. Thesis studies, as a case project, the product development of one of the most configurable elevator car products ever in KONE's standard offering and use of a new design system. One of the project's goals was to make a 3D model of the product so that it can be directly used for order automation for manufacturing fiat pattern drawings. The quality of the models, sharing of the design logic, and creation of technical drawings during the case project turned out to be the biggest areas for improvement. The referencing principles of the models were not optimum for ensuring the highest degree of quality for the models. Creating, sharing, and maintaining the logic behind the product was not easy because of several different environments, formats, syntaxes, processes, and methods. Drawings that are requested by factories and suppliers are based on processes for simpler products and are proving to be difficult to create and maintain with more complex products. With the advanced training of designers, a lot could be improved. However, considering the challenges faced in the project, the system could also be reconsidered and improved further. With certain improvements, more automated and feasible order processing and the creation and maintenance of mass customization products with the help of a 3D model could be achieved.Massakustomointituotteet ja niiden kysyntä aiheuttaa haasteita mekaniikkasuunnitteluun nykypäivänä. Tämä näkyy myös KONE:n yhä enemmän ja enemmän varioituvissa esisuunnitelluissa tuotteissa. Tuoterakenteissa on sekä varioituvia että kiinteitä komponentteja. Tällaisten tuotteiden ylläpito pitäisi olla mahdollista sekä PDM- että CAD-järjestelmissä. Tämän diplomityön tarkoituksena on löytää keinoja parantaa KONE:lla käytössä olevia menetelmiä laadukkaiden, helposti muokattavissa olevien ja ylläpidettävien 3D-mallien ja tuoterakenteiden tekemiseksi. Haasteena on yhdistää tehokkaasti varioituvia ja kiinteitä osia sisältävien tuoterakenteiden konfigurointi ja toteutettavissa oleva 3D-mallinnus sekä dokumentaatio. Diplomityössä tutkimuskohteena on yhden KONE:n vakiotarjonnassa kaikkien aikojen eniten konfiguroitavissa olevan tuotteen tuotekehitys uudessa suunnitteluympäristössä. Yksi tuotekehitysprojektin tavoitteista oli tehdä 3D-malli siten, että sitä voidaan käyttää suoraan tilausautomaattina valmistuksen levykuville. Suunnitteluprojektin aikana isoimmat haasteet liittyivät mallin laatuun, konfigurointilogiikan sekä teknisten piirustusten tekemiseen. Mallien referointi käytännöt eivät olleet kaikkein optimaalisimpia mahdollisimman laadukkaiden mallien takaamiseksi. Oikea suunnittelutieto on tärkeää myös muille kuin suunnittelijoille. Konfigurointilogiikkaa kuitenkin kirjoitettiin useampaan paikkaan ja tiedon jakaminen useille eri tahoille oli hankalaa. Tekniset piirustukset vaadittiin muodossa, joka perustuu yksinkertaisimmille tuotteille kehitettyyn prosessiin, joka käy raskaaksi hankalampien tuotteiden kanssa. Suunnittelijoiden edistynyt koulutus parantaisi jo heti paljon. Haasteet, joita projektin aikana tuli ilmi ovat kuitenkin niin laajoja ja isoja, että systeemiä kehittämällä voidaan saavuttaa vielä enemmän. Tietyillä parannuksilla voitaisiin saavuttaa massakustomointituotteiden vieläkin automaattisempi ja toimivampi tilausten käsittely ja tuotteen ylläpito 3D -mallia hyödyntäen.Description
Supervisor
Juhanko, JariThesis advisor
Pohjoispuro, PetriKeywords
3D-model, 3D-malli, order automation, tilausautomaatio, mass customization, massakustomointi, pre-engineering, esisuunnittelu, model performance, mallin suorituskyky, model quality, mallin laatu