Novel phase change material compositions for heat transfer and storage applications
Loading...
URL
Journal Title
Journal ISSN
Volume Title
School of Engineering |
Doctoral thesis (article-based)
| Defence date: 2018-05-11
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.
Authors
Date
2018
Major/Subject
Mcode
Degree programme
Language
en
Pages
83 + app. 61
Series
Aalto University publication series DOCTORAL DISSERTATIONS, 57/2018
Abstract
Efficient energy storage and transfer is essential in order to meet the continuously increasing need of energy in a sustainable manner. Thermal energy covers a large part of the energy use: in Finland, the share of heating, ventilation and air conditioning is 22% of the total energy use. This dissertation focuses on the material development of heat transfer fluids (HTFs) and long-term thermal energy storages (LTES) based on phase change materials (PCMs). Many recent publications have demonstrated that nanofluids, dispersions of nanoscale particles and HTF, have higher thermal conductivity and improved convective heat transfer performance as compared to conventional HTFs. However, the results are contradictory and in some publications these abnormalities are not observed at all. This dissertation researches novel type of nanofluid: suspensions of nanoscale PCM particles. In PCM suspensions, both the latent heat of the PCM and the sensible heat of the fluid are exploited for heat transfer. PCM nanofluids are produced with high- and low-energy emulsification methods. The heterogeneity, viscosity and specific heat affect most the thermal properties and convective heat transfer performance of the fluids. No anomalies in the convective heat transfer of the PCM nanofluids are observed if the heterogeneity and changed material properties are taken into account. Efficient LTES that is able to store heat for several months or even for years would be highly beneficial, particularly in cold-climate countries. In principle, thermal energy can be stored long-term almost lossless in supercooled PCMs. The stored heat is released from the supercooled PCM on demand by crystallization. So far, the metastability of the supercooled state has prevented the use of PCMs in large-scale LTES: supercooled melts are always prone to spontaneous crystallization that dissipates the stored heat. Two novel LTES materials with modified supercooling and crystallization properties are developed in this dissertation. Both innovations are based on a supercooling polyol PCM and a polymer additive. The first material is a microstructured polyol-polystyrene composite that is prepared by a new method utilizing polymerization of high internal phase emulsion. The novel microstructured erythritol crystallized more efficiently and in a more reproducible manner than the bulk polyol. The other LTES innovation of this thesis is a glass-forming mixture of a polyol PCM and cross-linked polyelectrolyte. The strong intermolecular forces of the mixture restrain the crystallization of PCM on cooling. Instead, the PCM supercools and vitrifies. The new material releases the stored heat by cold-crystallization. For a first time, heat can be stored long-term in supercooled PCM as low temperatures as desired without the risk of spontaneous crystallization, and released from the material by a slight heating.Tehokas energian varastointi ja siirto ovat keskeisessä asemassa, jotta kasvava energiantarve voidaan täyttää ympäristöystävällisesti. Lämpöenergia kattaa suuren osan käyttöenergiasta: Suomessa lämmitys ja ilmanvaihto kattaa 22 % kokonaisenergiankulutuksesta. Tässä väitöskirjassa kehitetään uusia lämmönsiirto- ja lämpövarastomateriaaleja perustuen faasimuutosmateriaaleihin (engl. phase change material, PCM). Useiden tutkimusten mukaan nanonesteillä, lämmönsiirtonesteiden ja nanopartikkelien suspensioilla, on havaittu olevan korkeampi lämmönjohtavuus ja parempi lämmönsiirtokyky kuin perinteisillä lämmönsiirtonesteillä. Alan tutkimustulokset ovat kuitenkin ristiriitaisia, ja joissakin tutkimuksissa nanonesteillä ei ole havaittu lainkaan poikkeavia lämmönsiirto-ominaisuuksia. Tämä väitöskirja keskittyy uuteen nanonestetyyppiin: PCM nanopartikkelisuspensioihin. PCM nesteiden lämmönsiirto perustuu sekä PCM:n latenttilämpöön että suspension tuntuvaan lämpöön. Väitöskirjassa valmistetaan PCM nanonesteitä korkea- ja matalaenergian emulgointimenetelmillä. Nanonesteiden heterogeenisyys, viskositeetti ja lämpökapasiteetti vaikuttavat eniten nesteiden konvektiiviseen lämmönsiirtotehokkuuteen. Nanonesteiden johtavuudessa tai lämmönsiirtokyvyssä ei havaita poikkeavuuksia, kun nesteiden heterogeenisyys ja muuttuneet aineominaisuudet huomoidaan analyysissä. Tehokkaassa pitkäaikaisessa lämpövarastossa varastointiperiodi voi olla useita kuukausia, jopa vuosia.Tehokas pitkäaikainen lämpövarasto olisi erittäin tärkeä innovaatio erityisesti kylmän ilmaston maissa. Lämpöenergiaa voidaan varastoida pitkäaikaisesti lähes häviöttömästi alijäähtyneeseen PCM:n. Varastoitu energia vapautetaan kiteyttämällä alijäähtynyt PCM. Alijäähtyneen tilan metastabiilisuus on estänyt tähän asti ilmiön hyödyntämisen suurikokoisissa lämpövarastoissa: alijäähtynyt PCM on aina altis spontaanille kiteytymiselle, joka sattuessaan vapauttaa varastoidun energian. Tässä väitöskirjassa kehitetään kaksi uutta materiaalia pitkäaikaiseen lämmönvarastointiin. Materiaali-innovaatiot perustuvat alijäähtyvään sokerialkoholi PCM:n ja polymeerilisäaineeseen, joka muokkaa PCM:n alijäähtymis- ja kiteytymisominaisuuksia. Ensimmäinen materiaali on mikrorakenteinen polyoli-polystyreenikomposiitti, joka valmistetaan uudella menetelmällä hyödyntäen polyoli-styreeni emulsion polymerointia. Uusi mikrorakenteinen erytritoli PCM kiteytyy tehokkaammin ja toistettavammin kuin bulkki PCM. Toinen tämän työn lämpövarastoinnovaatio on lasittuva polyoli-polyelektrolyyttiseos. Kiteytymisen sijaan PCM alijäähtyy ja lasittuu jäähdytyksessä. Materiaali vapauttaa varastoimansa lämpöenergian kylmäkiteytymällä. Ensimmäistä kertaa lämpöenergiaa voidaan varastoida pitkäaikaisesti ilman spontaanin kiteytymisen riskiä alijäähtyneeseen PCM:n kuinka alhaisessa lämpötilassa tahansa, ja purkaa amorfisesta materiaalista pienellä lämmityksellä.Description
Supervising professor
Järvinen, Mika, Prof., Aalto University, Department of Mechanical Engineering, FinlandAla-Nissilä, Tapio, Prof., Aalto University, Department of Applied Physics, Finland
Thesis advisor
Seppälä, Ari, Prof., Aalto University, Department of Mechanical Engineering, FinlandKeywords
phase change material, heat transfer, thermal energy storage, nanofluid, supercooling, faasimuutosmateriaali, lämmönsiirto, lämpövarasto, nanoneste, alijäähtyminen
Other note
Parts
-
[Publication 1]: Puupponen, Salla; Seppälä, Ari; Saari, Kari: Ala-Nissilä, Tapio. 2015. Preparation of paraffin and fatty acid phase changing nanoemulsions for heat transfer. Thermochimica Acta 601: 33-38.
DOI: 10.1016/j.tca.2014.12.020 View at publisher
-
[Publication 2]: Mikkola, Valtteri; Puupponen, Salla; Saari, Kari; Ala-Nissilä, Tapio; Seppälä, Ari. 2017. Thermal properties and convective heat transfer of phase changing paraffin nanofluids. International Journal of Thermal Sciences 117: 163-171.
DOI: 10.1016/j.ijthermalsci.2017.03.024 View at publisher
-
[Publication 3]: Puupponen, Salla; Mikkola, Valtteri; Ala-Nissilä, Tapio; Seppälä, Ari. 2016. Novel microstructured polyol-polystyrene composites for seasonal heat storage. Applied Energy 172: 96-106.
DOI: 10.1016/j.apenergy.2016.03.023 View at publisher
-
[Publication 4]: Puupponen, Salla; Seppälä, Ari. 2018. Cold-crystallization of polyelectrolyte absorbed polyol for long-term thermal energy storage. Solar Energy Materials and Solar Cells 180: 59-66.
DOI: 10.1016/j.solmat.2018.02.013 View at publisher