Nanostructured thermoelectric materials for transparent and flexible applications

Loading...
Thumbnail Image

URL

Journal Title

Journal ISSN

Volume Title

School of Electrical Engineering | Doctoral thesis (article-based) | Defence date: 2023-09-04

Date

2023

Major/Subject

Mcode

Degree programme

Language

en

Pages

73 + app. 57

Series

Aalto University publication series DOCTORAL THESES, 120/2023

Abstract

The global energy use is predicted to grow by up to 50% in the coming decades, placing both pressure on resources and heavy demands on the energy efficiency of technologies around us. The majority of primary energy consumption is wasted as heat, which is ubiquitous in a difficult-to-use low-grade form. At the same time, the number of electronic devices in both everyday life and industry is increasing rapidly.   Thermoelectric materials enable converting heat into electricity, but their large-scale use is hindered by a low power per cost figure. The use of nanostructuring has enabled improving the thermoelectric performance by careful engineering of both electronic and thermal properties of these materials. Concurrently, also other material properties, such as optical transparency or mechanical flexibility, can be improved. The emergence of thermoelectric materials with functional properties could promote the widespread adoption of thermoelectric devices by providing novel uses and application domains.    This thesis presents ways to engineer thermoelectric materials for functional applications using nanostructuring as well as demonstrates a few proof-of-concept devices based on these materials. The thesis first studies the thermal properties of core-shell GaAs-AlAs nanowire arrays, a material system important for a variety of optoelectronic devices. Characterization by the transient thermoreflectance technique indicates that the thickness of the introduced epitaxial AlAs shell can be exploited in controlling the thermal properties of the heterostructure. Second, widely studied transparent thermoelectric material, ZnO, is grown using atomic layer deposition (ALD). Sandwiching of Zr in between ZnO layers grown by ALD is found to improve the room-temperature thermoelectric performance of ZnO at a 2% nominal concentration of Zr. Further, nanoporous grass-like alumina (GLA) surface is used as a template for ALD of Al-doped ZnO (AZO), showing increased carrier concentration and subsequently improved electrical conductivity and thermoelectric power factor. In addition, the transparency of the AZO film grown on GLA is enhanced due to the antireflective behaviour partly inherited from GLA. Finally, nanostructured materials are used in two instances to realize flexible thermoelectric devices. First, a thermoelectric generator based on InAs nanowire networks grown directly on flexible plastic is demonstrated. Second, a thermal distribution sensor based on spray-deposited multilayer graphene is presented.   The results obtained in this thesis demonstrate various ways for engineering the properties of thermoelectric materials for functional applications. Further, approaches enabling the scalable and cost-efficient fabrication of these materials are presented, drafting routes for practical utilization of functional thermoelectric devices.

Energian kulutuksen arvioidaan kasvavan lähivuosikymmeninä jopa 50%, mikä rasittaa energiantuotantoketjua ja asettaa vaatimuksia käyttämämme teknologian energiatehokkuudelle. Valtaosa kulutetusta primäärienergiasta menetetään hukkalämpönä, jota esiintyy kaikkialla hankalasti hyödynnettävässä muodossa. Samaan aikaan sähköisten laitteiden määrä niin arkikäytössä kuin teollisuudessakin kasvaa nopeasti.   Lämpösähköiset materiaalit mahdollistavat lämmön muuntamisen sähköksi, mutta  heikko teho-kustannussuhde hidastaa niiden yleistymistä. Materiaalien sähköisten- ja lämpöominaisuuksien muokkaaminen nanorakenteistamalla kuitenkin mahdollistaa näiden materiaalien suorituskyvyn kasvattamisen. Nanorakenteistamalla on mahdollista parantaa myös materiaalien muita ominaisuuksia, kuten läpinäkyvyyttä tai taipuisuutta. Tällaisilla funktionaalisilla ominaisuuksilla varustettujen lämpösähköisten materiaalien saatavuus voi edistää lämpösähköisten laitteiden yleistymistä uusien käyttökohteiden ja sovellusten kautta.   Tämä väitöskirja esittelee tapoja toteutta nanorakenteistamista hyödyntäviä lämpösähköisiä materiaaleja sekä näihin materiaaleihin pohjautuvia laitteita. Väitöskirjassa tutkitaan ensin lämpöominaisuuksia kuori-vaippa GaAs-AlAs -nanolankahiloissa, joka on tärkeä materiaali etenkin optoelektroniikan sovelluksissa. Transientilla lämpöreflektanssimittauksella havaitaan epitaksiaalisen AlAs-vaipan paksuuden vaikuttavan heterorakenteen lämpöominaisuuksiin.Seuraavaksi tutkitaan läpinäkyvän lämpösähköisen materiaalin, ZnO:n, ominaisuuksia atomikerroskasvatetuista (ALD) kalvoista. Zirkonin kasvattamisen ZnO-kerrosten väliin havaitaan parantavan lämpösähköisiä ominaisuuksia huoneenlämmössä 2% nimellisellä zirkonkonsentraatiolla. Kun nanohuokoista ruohonkaltaista alumiinioksidia (GLA) käytetään Al-seostetun ZnO:n (AZO) kasvatusalustana, havaitaan kasvanut varauksenkuljettajatiheys ja tästä seuraava parannus sekä sähkönjohtavuudessa että tehokertoimessa. Lisäksi GLA:n päälle kasvatetun AZO:n läpinäkyvyyden havaitaan parantuvan GLA:lta osittain periytyvän heijastamattomuuden ansiosta. Lopuksi nanorakenteisia materiaaleja käytetään kahden erityyppisen taipuisan lämpösähköisen laitteen toteutuksessa. Ensin esitellään suoraan taipuisalle muoville kasvatettuihin InAs-nanolankaverkkoihin pohjautuva lämpösähköinen generaattori, minkä jälkeen esitellään ruiskupinnoitettua grafeenikalvoa hyödyntävä passiivinen lämpötilajakauma-anturi.   Työn tulokset esittävät tapoja toteuttaa funktionaalisiin sovelluksiin sopivia lämpösähköisiä materiaaleja. Esitellyt lähestymistavat mahdollistavat skaalautuvaa ja kustannustehokasta materiaalien valmistusta, viitoittaen siten tietä kohti funktionaalisten lämpösähköisten laitteiden hyödyntämistä käytännön sovelluksissa.

Description

Supervising professor

Tittonen, Ilkka, Prof., Aalto University, Department of Electronics and Nanoengineering, Finland

Keywords

thermoelectricity, nanostructures, thin films, lämpösähköinen ilmiö, nanorakenteet, ohutkalvot

Other note

Parts

  • [Publication 1]: T. Juntunen, T. Koskinen, V. Khayrudinov, T. Haggren, H. Jiang, H. Lipsanen and I. Tittonen. Thermal conductivity suppression in GaAs–AlAs core–shell nanowire arrays. Nanoscale, 11, 20507-20513, October 2019.
    Full text in Acris/Aaltodoc: http://urn.fi/URN:NBN:fi:aalto-201911076161
    DOI: 10.1039/C9NR06831G View at publisher
  • [Publication 2]: T. Koskinen, U. Volin, C. Tossi, R. Raju and I. Tittonen. Atomic layer deposition of Zr-sandwiched ZnO thin films for transparent thermoelectrics. Nanotechnology, 34, 3, 035401, November 2022.
    Full text in Acris/Aaltodoc: http://urn.fi/URN:NBN:fi:aalto-202211306689
    DOI: 10.1088/1361-6528/ac9980 View at publisher
  • [Publication 3]: T. Koskinen, R. Raju, I. Tittonen and C. Kauppinen. Grass-like alumina enhances transmittance and electrical conductivity of atomic layer deposited Al-doped ZnO for thermoelectric and TCO applications. Applied Physics Letters, 123, 011902, July 2023.
    Full text in Acris/Aaltodoc: http://urn.fi/URN:NBN:fi:aalto-202308014528
    DOI: 10.1063/5.0146772 View at publisher
  • [Publication 4]: T. Koskinen, V. Khayrudinov, F. Emadi, H. Jiang, T. Haggren, H. Lipsanen and I. Tittonen. Thermoelectric Characteristics of InAs Nanowire Networks Directly Grown on Flexible Plastic Substrates. ACS Applied Energy Materials, 4, 12, 14727-14734, November 2021.
    DOI: 10.1021/acsaem.1c03405 View at publisher
  • [Publication 5]: T. Koskinen, T. Juntunen and I. Tittonen. Large-area Thermal Distribution Sensor Based on Multilayer Graphene Ink. Sensors, 20, 18, 5188, September 2020.
    Full text in Acris/Aaltodoc: http://urn.fi/URN:NBN:fi:aalto-202010025745
    DOI: 10.3390/s20185188 View at publisher

Citation