aalto1 untyped-item.component.html
Digitisation of hard rock tunnel for remote fracture mapping and virtual training environment
Loading...
Access rights
openAccess
acceptedVersion
URL
Journal Title
Journal ISSN
Volume Title
A4 Artikkeli konferenssijulkaisussa
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.
Date
Department
Major/Subject
Mcode
Degree programme
Language
en
Pages
8
Series
ISRM International Symposium - EUROCK 2020: International Society for Rock Mechanics and Rock Engineering Norwegian Group for Rock Mechanics
Abstract
The knowledge of geometrical properties of discontinuities is of crucial importance in the rock mass characterisation process. Recent advances in photogrammetry allow for an easy digitisation procedure of rock surfaces so that digital 3D models can be used for remote site characterisation. This paper presents a methodology to digitise tunnel rock surfaces using Structure from Motion digital photogrammetry for remote measurements of discontinuities. The proposed method is applied on a 12 m long and 4 m high tunnel section of an underground research tunnel at Aalto University in Finland, which is scanned using Canon 5Ds R DSLR camera and Canon 14 mm f/2.8 and 35 mm f/1.4 lenses. The photos are then processed in commercially available photogrammetric software – RealityCapture. As a result, a high-resolution 3D point cloud of the tunnel wall is produced. The point cloud is used for semi-automatic measurements of fracture orientations. In addition, a digital twin of the tunnel section with photorealistic surface texture is created and implemented into virtual reality (VR) system – Virtual Underground Training Environment (VUTE) developed for training of rock mass characterisation. The VUTE system enables remote visual inspection of the rock surface and virtual measurements of the orientation of discontinuities with designated virtual tools. The semi-automatic measurements extracted from the 3D point cloud using a discontinuity extractor software are compared with measurements performed in VR as well as with manual measurements performed in the tunnel. The results demonstrate that all three mapping methods identify three major joint sets with analogous orientations. The automatic fracture mapping method achieves the highest density of the measurements, allows repeatability, and enables other parameters to be extracted automatically, such as persistence and spacing of the discontinuities. This confirms the advantage of automatic analysis of discontinuities on 3D point clouds of tunnel rock surface digitised using photogrammetry.
Description
Other note
Citation
Janiszewski, M, Uotinen, L, Baghbanan, A & Rinne, M 2020, Digitisation of hard rock tunnel for remote fracture mapping and virtual training environment. in C C Li, H Ødegaard, A H Høien & J Macias (eds), ISRM International Symposium - EUROCK 2020 : International Society for Rock Mechanics and Rock Engineering Norwegian Group for Rock Mechanics . Norsk Betongforening, ISRM International Symposium, Trondheim, Norway, 14/06/2020.