Precious metal recoveries in secondary copper smelting with high-alumina slags
Loading...
Access rights
openAccess
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
Date
2020-05-01
Major/Subject
Mcode
Degree programme
Language
en
Pages
14
642-655
642-655
Series
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT, Volume 22, issue 3
Abstract
Waste electrical and electronic equipment (WEEE) represents a significant urban resource for precious metals. To maximize the recoveries and sustainable use of these metals, their behavior needs to be characterized in the secondary copper smelting of WEEE. The current study experimentally determined the distributions of gold, silver, platinum and palladium between copper alloy and FeOx–SiO2–Al2O3/FeOx–SiO2–Al2O3–CaO slags (LCu/s[M] = [M]Copper/[M]Slag) over the oxygen partial pressure range of 10−5 – 10−10 atm at 1300 °C. In addition, the equilibria of copper alloy, slag and Al–Fe spinel system are presented and discussed. The experiments were conducted employing an equilibration—drop-quenching technique followed by major element analysis with Electron Probe MicroAnalysis (EPMA) and trace element analysis with sensitive Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS). The results showed that the distribution coefficient of silver increased from 10 to 103 as a function of decreasing oxygen partial pressure. For gold, platinum and palladium, the distribution coefficients were at minimum 105. Lime addition improved the recovery of silver notably and had a small positive effect on gold recovery into copper. Overall, the precious metals can be recovered very efficiently in copper alloy via secondary copper smelting with alumina-rich iron-silicate slags.Description
Keywords
Black copper, LA-ICP-MS, Recycling, Sustainability, WEEE
Other note
Citation
Avarmaa, K, O’Brien, H, Klemettinen, L & Taskinen, P 2020, ' Precious metal recoveries in secondary copper smelting with high-alumina slags ', Journal of Material Cycles and Waste Management, vol. 22, no. 3, pp. 642-655 . https://doi.org/10.1007/s10163-019-00955-w