Biochar-reinforced polyamide 12 composites for sustainable selective laser sintering 3D printing: Performance enhancement and carbon footprint reduction

Thumbnail Image

Files

Biochar-reinforced_polyamide_12_composites_for_sustainable_selective_laser_sintering_3D_printing.pdf (7.53 MB)

Access rights

openAccess
CC BY
publishedVersion

URL

Journal Title

Journal ISSN

Volume Title

A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.

Authors

Date

2025-09-01

Department

Department of Chemical and Metallurgical Engineering
Department of Energy and Mechanical Engineering
Department of Bioproducts and Biosystems

Major/Subject

Mcode

Degree programme

Language

en

Pages

14

Series

Chemical Engineering Journal, Volume 519

Abstract

The development of sustainable, high-performance materials for additive manufacturing is crucial for advancing low-carbon technologies. This study investigates biochar, a renewable carbon-rich material derived from biomass pyrolysis, as a functional filler in polyamide 12 (PA12) composites for selective laser sintering (SLS) 3D printing. A comprehensive structure–property–function analysis revealed that incorporating up to 10 wt% biochar significantly enhanced the tensile modulus from 1.4 ± 0.1 GPa to 3.2 ± 0.3 GPa and tensile strength from 43.1 ± 1.2 MPa to 64.7 ± 2.0 MPa, without compromising printability. At higher loadings (>20 wt%), biochar agglomeration and interfacial defects were observed via scanning electron microscopy, leading to reduced mechanical performance. Thermogravimetric analysis showed improved thermal stability, with a shift in peak degradation temperature from 445.5 °C for neat PA12 to 454.0 °C for the composite containing 30 wt% biochar. Rheological characterization demonstrated increased viscosity and elasticity, facilitating better melt strength and SLS processability. Most notably, life cycle assessment (LCA) revealed up to a 66 % reduction in climate change potential for the PA12-BC20 composite compared to pure PA12 when accounting for biochar's biogenic carbon sequestration. These findings establish biochar as a structurally and environmentally advantageous carbon additive, offering a dual benefit of performance enhancement and carbon footprint reduction for advanced sustainable 3D printing applications.

Description

Publisher Copyright: © 2025 The Authors

Keywords

3D printing, Biochar, Life cycle assessment (LCA), Polyamide 12, Selective laser sintering (SLS)

Other note

DOI

10.1016/j.cej.2025.165502

Citation

Baniasadi, H, Puttonen, T, Abidnejad, R, Jayaprakash, S, Partanen, J, Lizundia, E & Niskanen, J 2025, 'Biochar-reinforced polyamide 12 composites for sustainable selective laser sintering 3D printing: Performance enhancement and carbon footprint reduction', Chemical Engineering Journal, vol. 519, 165502. https://doi.org/10.1016/j.cej.2025.165502

Permanent link to this item

https://urn.fi/URN:NBN:fi:aalto-202508045655

Collections

[article-cris] Kemian tekniikan korkeakoulu / CHEM