Distributed manufacturing of after market flexible floating photovoltaic modules
No Thumbnail Available
Access rights
openAccess
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Other link related to publication (opens in new window)
Date
2020-12
Major/Subject
Mcode
Degree programme
Language
en
Pages
10
Series
Sustainable Energy Technologies and Assessments, Volume 42
Abstract
Floating photovoltaic (FPV) technology is gaining prominence as a means to alleviate land use conflicts while obtaining large solar PV deployments and simultaneously reducing evaporated water loss. In this study, an open source after-market distributed manufacturing method is proposed to be applied to large flexible PV modules to make flexible FPV systems. Specifically this study considers surface floating of flexible thin film solar PV using three types of closed-cell foams: i) neoprene, ii) mincell and iii) polyethylene. The fabricated FPV underwent indoor and outdoor tests for flotation, wave resistance, temperature and resistance to algae accumulation. The average operational temperature was reduced by 10–20 °C for the FPV compared to land-based mounting indicating substantial increases in electricity output compared to ground-based deployment of any type of PV (2–4% for amorphous silicon used here and 5–10% for crystalline silicon based PV). In addition, foam-based FPV racking were also found to reduce costs of racking to $0.37–0.61/W, which is significantly lower than raft-based FPV as well as conventional land-based racking. The results of this preliminary study indicate that foam-backed FPV is exceptionally promising and should be further investigated with different foams, larger systems and more diverse deployments for longer periods to increase PV deployments.Description
Keywords
Closed-cell foams, Flexible, Floating photovoltaic, FPV, Photovoltaic
Other note
Citation
Mayville, P, Patil, N V & Pearce, J M 2020, ' Distributed manufacturing of after market flexible floating photovoltaic modules ', Sustainable Energy Technologies and Assessments, vol. 42, 100830 . https://doi.org/10.1016/j.seta.2020.100830