District heating driven membrane distillation for advanced flue gas condensate treatment in combined heat and power plants

Loading...
Thumbnail Image

Access rights

openAccess
publishedVersion

URL

Journal Title

Journal ISSN

Volume Title

A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Major/Subject

Mcode

Degree programme

Language

en

Pages

11

Series

Journal of Cleaner Production, Volume 292

Abstract

This investigation involves recent work on developing membrane distillation (MD) as a novel separation technology for flue gas condensate treatment in combined heat and power (CHP) applications. Flue gas condensate samples were obtained from municipal solid waste and bio-fuel fired CHP facilities and were tested in laboratory-scale air gap MD equipment. Separation efficiencies and other water quality parameters were measured, and the outcomes show that high-quality clean condensate can be recovered, i.e., conductivity <5 mS/m; total organic carbon <2 ppm; total hardness <0.15 °dH; pH ∼7.5; and turbidity <1 FNU. Strict discharge limits for cadmium could not be achieved in all trials. This aspect is examined in further detail with respect to potential mechanisms attributed to the non-ideal separation of contaminants below the parts per billion limit. Beyond this, an industrial scale district heating driven membrane distillation system was designed and analyzed. The estimated annual thermal energy demand was 88 GWh for treating 500,000 m3 of flue gas condensate per year, with an expected clean condensate cost of around 2.6 $/m3.

Description

Other note

Citation

Noor, I, Martin, A & Dahl, O 2021, 'District heating driven membrane distillation for advanced flue gas condensate treatment in combined heat and power plants', Journal of Cleaner Production, vol. 292, 125979. https://doi.org/10.1016/j.jclepro.2021.125979