Double oxidation scheme for tunnel junction fabrication
Loading...
Access rights
openAccess
publishedVersion
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.
Date
Department
Major/Subject
Mcode
Degree programme
Language
en
Pages
4
Series
Journal of Vacuum Science and Technology. Part B., Volume 26, issue 1, pp. 28-31
Abstract
The authors report a method to achieve Al–AlOx–Al tunnel junctions with high specific resistance in a controlled manner using a double oxidation technique. The technique is based on the standard method for oxidation repeated on an additional Al layer. The tunnel junctions were characterized with standard methods, such as comparison of room temperature resistance with liquid helium resistance and the authors found them to be of comparable quality to junctions fabricated with standard single oxidation. Fitting with the Simmons model suggests that both the barrier width and barrier height are consistent with those obtained in a single oxidation step. The junction specific capacitance was determined at low temperature to be 68fF/μm2. These junctions, employed in low temperature measurements and applications, demonstrate expected and stable conductance characteristics. The double oxidation method is straightforward to implement in a basic setup for tunnel junction fabrication.Description
Keywords
Other note
Citation
Holmqvist, T, Meschke, M & Pekola, J 2008, 'Double oxidation scheme for tunnel junction fabrication', Journal of Vacuum Science and Technology. Part B., vol. 26, no. 1, pp. 28-31. https://doi.org/10.1116/1.2817629