Multiplexed readout of superconductor-normal-conductor-superconductor bolometers

Loading...
Thumbnail Image

Access rights

openAccess
CC BY-NC
publishedVersion

URL

Journal Title

Journal ISSN

Volume Title

A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Major/Subject

Mcode

Degree programme

Language

en

Pages

8

Series

Journal of Applied Physics, Volume 138, issue 2, pp. 1-8

Abstract

Recently, ultrasensitive calorimeters have emerged as a resource efficient solution for different applications, such as qubit readout, radiation sensors, etc. Multiplexing these detectors paves the path for a larger range of usage. However, experiments demonstrating frequency multiplexing of these superconductor-normal-conductor-superconductor (SNS) sensors are lacking in the literature. To this end, we present the design, fabrication, and operation of three SNS sensors with frequency-multiplexed input and probe circuits, all on a single chip. These devices have their probe frequencies in the range of 150-200 MHz, which is well detuned from the heater frequencies of 4.4-7.6 GHz compatible with typical readout frequencies used in different applications in microwave physics. Importantly, we show on-demand triggering of both individual and multiple low-noise SNS bolometers with minimal cross talk. These experiments pave the way for multiplexed bolometric characterization and calorimetric applications.

Description

| openaire: EC/H2020/101053801/EU//ConceptQ | openaire: EC/HE/101113946/EU//OpenSuperQPlus100

Keywords

Other note

Citation

Singh, P, Gunyhó, A, Suominen, H, Catto, G, Blanchet, F, Chen, Q M, Alizadeh, A, Keränen, A, Ma, J, Mörstedt, T, Liu, W & Möttönen, M 2025, 'Multiplexed readout of superconductor-normal-conductor-superconductor bolometers', Journal of Applied Physics, vol. 138, no. 2, 024401, pp. 1-8. https://doi.org/10.1063/5.0280536