Active Acoustics With a Phase Cancelling Modal Reverberator

Loading...
Thumbnail Image

Access rights

openAccess
publishedVersion

URL

Journal Title

Journal ISSN

Volume Title

A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Major/Subject

Mcode

Degree programme

Language

en

Pages

11

Series

Journal of the Audio Engineering Society, Volume 72, issue 10, pp. 705-715

Abstract

Active acoustics (AA) systems are used to electronically modify the acoustics of a room (e.g., in live music venues). AA systems have an inherent feedback component and can suffer from instability and coloration artifacts resulting from too high feedback gains. State-of-the-art methods can improve system stability and coloration, usually at the cost of complex implementations and long parameter-tuning sessions. They can also cause sound artifacts due to time-varying components, limiting the enhancement at low frequencies. This work proposes a time-invariant feedback attenuation method for low frequencies based on a modal reverberator. The attenuation is achieved through destructive acoustic interference, obtained via phase shifts between the input and output signals. The analyzed frequency range is 0–500 Hz, where the room transfer functions are considered highly invariant over time. The results show a gain-before-instability increase of more than 5 dB for a modal reverberator with high mode density in this frequency range. The improvement is also stable for low-magnitude changes in the room transfer functions over time. The proposed method provides a robust AA system with artificial reverberation for the low-frequency range and can be used alongside other established methods.

Description

Other note

Citation

De Bortoli, G, Prawda, K & Schlecht, S 2024, 'Active Acoustics With a Phase Cancelling Modal Reverberator', Journal of the Audio Engineering Society, vol. 72, no. 10, pp. 705-715. https://doi.org/10.17743/jaes.2022.0171