aalto1 untyped-item.component.html
Electron-beam welded Cu-to-Ag joints for thermal contact at low temperatures
Loading...
Access rights
© 1991 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the authors and the American Institute of Physics. The following article appeared in Review of Scientific Instruments, Volume 62, Issue 5 and may be found at http://scitation.aip.org/content/aip/journal/rsi/62/5/10.1063/1.1142503.
Final published version
URL
Journal Title
Journal ISSN
Volume Title
School of Science |
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.
Authors
Date
Major/Subject
Mcode
Degree programme
Language
en
Pages
1370-1371
Series
Review of Scientific Instruments, Volume 62, Issue 5
Abstract
Electrical resistance measurements at 4.2 K on an electron‐beam welded Cu‐Ag joint and a simple screw‐fastened Cu‐Ag joint are reported. It was found that the welded joint, when annealed, gives a contact resistance that is about three times smaller than the resistances for the best screw‐fastened joints.
Description
Keywords
Other note
Citation
Yin, Shi & Hakonen, Pertti J. 1991. Electron-beam welded Cu-to-Ag joints for thermal contact at low temperatures. Review of Scientific Instruments. Volume 62, Issue 5. 1370-1371. ISSN 0034-6748 (printed). DOI: 10.1063/1.1142503