Electrodeposited Mesoporous Pt for Direct Ethanol Fuel Cells Anodes

Loading...
Thumbnail Image

Access rights

openAccess
publishedVersion

URL

Journal Title

Journal ISSN

Volume Title

A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Date

2016-09

Major/Subject

Mcode

Degree programme

Language

en

Pages

13

Series

International Journal of Electrochemical Science, Volume 11, issue 9, pp. 7631-7643

Abstract

In this study mesoporous Pt was electrodeposited from liquid crystal templates with different amount of Pt (0.60 mg/cm(2), 1.0 mg/cm(2) and 1.5 mg/cm(2)) directly on a carbon cloth using a potentiostatic method. These mesoporous Pt electrocatalysts were used as anodes for a direct ethanol fuel cell and the activity of ethanol oxidation reaction was studied. The electrochemical active surface area of the electrodes was measured using cyclic voltammetry under fuel cell conditions. Polarization and power curves for both commercial Pt and electrodeposited mesoporous Pt at different temperatures (30 degrees C, 50 degrees C and 70 degrees C) were studied, showing an increase of the performance with the temperature as expected. Despite lower Pt loading, all the mesoporous samples showed similar or better performances in the direct ethanol fuel cell when compared with the commercial Pt sample (4.0 mg/cm(2)). These results show that this catalyst preparation method can be a new route for the development of more efficient Pt based materials for direct alcohol fuel cells applications.

Description

Keywords

mesoporous Pt, electrodeposition, catalysts, direct ethanol fuel cell

Other note

Citation

Nguyet Doan, Figueiredo, M C, Johans, C & Kallio, T 2016, ' Electrodeposited Mesoporous Pt for Direct Ethanol Fuel Cells Anodes ', International Journal of Electrochemical Science, vol. 11, no. 9, pp. 7631-7643 . https://doi.org/10.20964/2016.09.06