Catalyst driven optimization of cogasification and economic evaluation for enriched hydrogen syngas production from lignocellulosic waste toward biorefinery applications
Loading...
Access rights
embargoedAccess
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View publication in the Research portal (opens in new window)
Date
Major/Subject
Mcode
Degree programme
Language
en
Pages
15
Series
Biomass & Bioenergy, Volume 203
Abstract
Growing environmental concerns have driven the search for renewable energy sources, particularly H2 production. This study evaluated conversion of coconut shells and wood blends in downdraft gasifier to maximize H2 yield and minimize tar formation in syngas, using mineral catalysts of cement, dolomite, and limestone. Effects of key parameters temperature (700–900 °C), catalyst loading (0–30 wt%), and blending ratio (20–80 wt%) were investigated. Process optimization was performed in Design of Expert and economic analysis was carried out at optimal conditions. Results revealed that dolomite achieved highest H2 yield, with significant increased from 4.49 to 23.31 vol% as temperature varied from 700 to 900 °C at 15 wt% catalyst loading. In case of cement, H2 yield increased from 13.22 to 20.57 vol% followed by limestone. CO yield increased from 17.82 to 25.96 vol% at higher temperature. coconut shell proportion in blend marginally improved CO yield. However, higher catalyst loading reduced CO yield. Among all catalysts, limestone yielded highest CO (30.13 vol%) at 900 °C, 30 wt% catalyst loading, and CS50:W50 blend. Tar formation was reduced significantly from 8.02 to 1.17 g/Nm3 with increasing temperature and catalyst loading (dolomite case). Under optimal conditions (900 °C, 30 wt% catalyst loading, CS50:W50) process achieved maximum 23.31 vol% H2 yield and minimum 1.17 g/Nm3 tar formation. Economic analysis indicated 3.09 MYR/kg syngas production cost that could be further reduced by process scale-up and adopting autothermal gasification. Overall, this study aids in selecting an effective catalyst for biomass gasification and provides an economic analysis to assess its commercial viability.Description
Other note
Citation
Ilyas, S U, Inayat, M, Shahbaz, M, Sulaiman, S A, Merdad, N A & Abdulrahman, A 2025, 'Catalyst driven optimization of cogasification and economic evaluation for enriched hydrogen syngas production from lignocellulosic waste toward biorefinery applications', Biomass & Bioenergy, vol. 203, 108338. https://doi.org/10.1016/j.biombioe.2025.108338