aalto1 untyped-item.component.html
Life Cycle Assessment of Cobalt Catalyst Production and Recycling
Loading...
Access rights
openAccess
publishedVersion
URL
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
View publication in the Research portal (opens in new window)
View/Open full text file from the Research portal (opens in new window)
Unless otherwise stated, all rights belong to the author. You may download, display and print this publication for Your own personal use. Commercial use is prohibited.
Date
Major/Subject
Mcode
Degree programme
Language
en
Pages
12
Series
Journal of Sustainable Metallurgy, Volume 10, issue 3, pp. 1795-1806
Abstract
Catalysts with an active phase of cobalt are crucial for Fischer–Tropsch synthesis (FTS), yet the environmental impacts of the catalyst production and the recycling of the spent catalyst remain largely unknown. The goal of this study was to evaluate the impacts of both catalyst production as well as the recycling of spent catalyst as cobalt hydroxide, cobalt sulfate, or cobalt carbonate. Life cycle assessment (LCA) was used to quantify the environmental impacts of the studied processes. The life cycle inventory (LCI) was gathered based on the mass and energy balances of process simulations built on information available in the literature. The results show that compared to primary production of equivalent products, all studied recycling processes for spent catalyst decrease the environmental impacts by more than 50% in all investigated impact categories. For example, the global warming potential (GWP) of cobalt recovery from spent FTS catalyst as cobalt sulfate was 1.7 kg CO2-eq./kg CoSO4whereas the corresponding GWP for primary production was 4 kg CO2-eq./kg CoSO4. The process hotspots of recycling were found to be the production of the chemicals consumed, particularly sodium hydroxide and sulfuric acid, which together contributed between 64 and 95% of the total environmental impacts. LCAs on FTS have included the consumption of cobalt catalyst in the LCI using various approximations. The impacts calculated for the production of cobalt catalyst in this study were found to be markedly higher. The largest contributors included the production of materials for the precursor and support, as well as NOx emissions and consumption of nitric acid. Graphical Abstract: (Figure presented.)
Description
Publisher Copyright: © The Author(s) 2024.
Other note
Citation
Aromaa-Stubb, R, Rinne, M & Lundström, M 2024, 'Life Cycle Assessment of Cobalt Catalyst Production and Recycling', Journal of Sustainable Metallurgy, vol. 10, no. 3, pp. 1795-1806. https://doi.org/10.1007/s40831-024-00897-0