Multi-Building Extraction and Alignment for As-Built Point Clouds : A Case Study With Crane Cameras
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
Frontiers in Built Environment, Volume 6
AbstractAutomatic reality capture and monitoring of construction sites can reduce costs, accelerate timelines and improve quality in construction projects. Recently, automatic close-range capture of the state of large construction sites has become possible through crane and drone-mounted cameras, which results in sizeable, noisy, multi-building as-built point clouds. To infer construction progress from these point clouds, they must be aligned with the as-designed BIM model. Unlike the problem of aligning single buildings, the multi-building scenario is not well-studied. In this work, we address some unique issues that arise in the alignment of multi-building point clouds. Firstly, we show that a BIM-based 3D filter is a versatile tool that can be used at multiple stages of the alignment process. We use the building-pass filter to remove non-building noise and thus extract the buildings, delineate the boundaries of the building after the base is identified and as a post-processing step after the alignment is achieved.Secondly, in light of the sparseness of some buildings due to partial capture, we propose to use the best-captured building as a pivot to align the entire point cloud. We propose a fully automated three-step alignment process that leverages the simple geometry of the pivot building and aligns partial xy-projections, identifies the base using z-histograms and aligns the bounding boxes of partial yz-projections. Experimental results with crane camera point clouds of a large construction site show that our proposed techniques are fast and accurate, allowing us to estimate the current floor under construction from the aligned clouds and enabling potential slab state analysis. This work contributes a fully automated method of reality capture and monitoring of multi-building construction sites.
reality capture, multi-building point cloud, building extraction, BIM model, construction site, crane cameras
Khalid Masood , M , Aikala , A , Seppänen , O & Singh , V 2020 , ' Multi-Building Extraction and Alignment for As-Built Point Clouds : A Case Study With Crane Cameras ' , Frontiers in Built Environment , vol. 6 , 581295 . https://doi.org/10.3389/fbuil.2020.581295