Creep and residual properties of filament-wound composite rings under radial compression in harsh environments

Loading...
Thumbnail Image
Access rights
openAccess
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
Date
2021-01-23
Major/Subject
Mcode
Degree programme
Language
en
Pages
18
1-18
Series
Polymers, Volume 23, issue 1
Abstract
This work focuses on the viscoelastic response of carbon/epoxy filament-wound composite rings under radial compressive loading in harsh environments. The composites are exposed to three hygro-thermo-mechanical conditions: (i) pure mechanical loading, (ii) mechanical loading in a wet environment and (iii) mechanical loading under hygrothermal conditioning at 40◦C. Dedicated equipment was built to carry out the creep experiments. Quasi-static mechanical tests are performed before and after creep tests to evaluate the residual properties of the rings. The samples are tested in (i) radial compression, (ii) axial compression, and (iii) hoop tensile strength. Different laminates wound at off-axis orientations are manufactured via filament winding and analyzed. Key results show that creep displacement is affected by both hygrothermal and mechanical conditionings, especially at a higher temperature. Moreover, residual properties are quantified showing that creep generates permanent damage in the cylinders.
Description
Keywords
Creep, Filament-wound ring, Hygrothermal conditioning, Radial compression
Other note
Citation
Eggers, F, Almeida, H, Lisbôa, T V & Amico, S C 2021, ' Creep and residual properties of filament-wound composite rings under radial compression in harsh environments ', Polymers, vol. 13, no. 1, 33, pp. 1-18 . https://doi.org/10.3390/polym13010033