Suitability of roll-to-roll reverse offset printing for mass production of millimeter-wave antennas: progress report

dc.contributorAalto-yliopistofi
dc.contributorAalto Universityen
dc.contributor.authorRäisänen, Anttien_US
dc.contributor.authorAla-Laurinaho, Juhaen_US
dc.contributor.authorAsadchy, Viktaren_US
dc.contributor.authorDiaz Rubio, Anaen_US
dc.contributor.authorKhanal, Subashen_US
dc.contributor.authorSemkin, Vasiliien_US
dc.contributor.authorTretyakov, Sergeien_US
dc.contributor.authorWang, Xuchenen_US
dc.contributor.authorZheng, Jianfangen_US
dc.contributor.authorAlastalo, Arien_US
dc.contributor.authorMäkelä, Tapioen_US
dc.contributor.authorSneck, Askoen_US
dc.contributor.departmentDepartment of Radio Science and Engineeringen_US
dc.contributor.departmentDepartment of Electronics and Nanoengineeringen_US
dc.contributor.departmentVTT Technical Research Centre of Finlanden_US
dc.date.accessioned2022-12-22T09:47:37Z
dc.date.available2022-12-22T09:47:37Z
dc.date.issued2016-11en_US
dc.description.abstractIn this work, we investigate different printing technologies suitable for mass production of millimeter-wave antennas and other devices, e.g., holograms and frequency selective absorbers, on flexible substrates. We concentrate especially on roll-to-roll reverse offset printing. The driving factors are low cost, high accuracy, high efficiency, and reliable performance. Therefore, we need to find and characterize suitable flexible substrates (permittivity and loss tangent at mm-wavelengths), conducting inks (viscosity, surface resistance of the resulting conducting layer), adhesion of the ink to the substrate, and feature size capable for printing mm-wave antennas and other passive devices in high volumes.en
dc.description.versionPeer revieweden
dc.format.extent5
dc.format.extent300-304
dc.format.mimetypeapplication/pdfen_US
dc.identifier.citationRäisänen , A , Ala-Laurinaho , J , Asadchy , V , Diaz Rubio , A , Khanal , S , Semkin , V , Tretyakov , S , Wang , X , Zheng , J , Alastalo , A , Mäkelä , T & Sneck , A 2016 , Suitability of roll-to-roll reverse offset printing for mass production of millimeter-wave antennas: progress report . in 2016 Loughborough Antennas & Propagation Conference (LAPC) . IEEE , pp. 300-304 , Loughborough Antennas & Propagation Conference , Loughborough , United Kingdom , 14/11/2016 . https://doi.org/10.1109/LAPC.2016.7807528en
dc.identifier.doi10.1109/LAPC.2016.7807528en_US
dc.identifier.isbn978-1-5090-0782-0
dc.identifier.otherPURE UUID: f74293b9-ea84-447e-97e3-80bda39fc3caen_US
dc.identifier.otherPURE ITEMURL: https://research.aalto.fi/en/publications/f74293b9-ea84-447e-97e3-80bda39fc3caen_US
dc.identifier.otherPURE FILEURL: https://research.aalto.fi/files/94938392/Suitability_of_roll_to_roll_reverse_offset_printing_for_mass_production_of_millimeter_wave_antennas_Progress_report.pdfen_US
dc.identifier.urihttps://aaltodoc.aalto.fi/handle/123456789/118564
dc.identifier.urnURN:NBN:fi:aalto-202212227302
dc.language.isoenen
dc.relation.ispartofLoughborough Antennas & Propagation Conferenceen
dc.relation.ispartofseries2016 Loughborough Antennas & Propagation Conference (LAPC)en
dc.rightsopenAccessen
dc.titleSuitability of roll-to-roll reverse offset printing for mass production of millimeter-wave antennas: progress reporten
dc.typeConference article in proceedingsfi
dc.type.versionacceptedVersion
Files