Aspects of nanospacecraft design for main-belt sailing voyage

No Thumbnail Available
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
Date
2021-05
Major/Subject
Mcode
Degree programme
Language
en
Pages
Series
Advances in Space Research
Abstract
We present a detailed mechanical and thermal analysis of a stand-alone nanospacecraft that performs asteroid flybys in the main asteroid belt (2.75 AU) and one Earth flyby at the end of the mission to return the gathered data. A fleet of such nanospacecraft (10 kg) has been proposed as part of the Multi-Asteroid Touring mission concept, a nearly propellantless mission where the electric solar wind sail (E-sail) is used for primary propulsion. The fleet makes flybys of thus far poorly characterised asteroid populations in the main belt and downlinks scientific data during the returning Earth flyby. The spacecraft size is close to a three-unit cubesat with a mass of less than 6 kg. The spacecraft is designed for a 3.2-year round trip. A 20-km-long E-sail tether is used. A remote unit is attached to the tether’s tip and stowed inside the spacecraft before the E-sail commissioning. The remote unit is slightly smaller than a one-unit cubesat with a mass of approximately 750 g. With an electrospray thruster, it provides angular momentum during tether deployment and spin-rate management while operating the E-sail. The selection of materials and configurations is optimised for thermal environment as well as to minimise the mass budget. This paper analyses the main spacecraft and remote-unit architectures along with deployment and operation strategies from a structural point of view, and thermal analysis for both bodies.
Description
Keywords
Nanospacecraft, E-sail, deep-space cubesat, structural design, thermal design
Other note
Citation
Iakubivskyi , I , Mačiulis , L , Janhunen , P , Dalbins , J , Noorma , M & Slavinskis , A 2021 , ' Aspects of nanospacecraft design for main-belt sailing voyage ' , Advances in Space Research , vol. 67 , no. 9 , pp. 2957-2980 . https://doi.org/10.1016/j.asr.2020.07.023