Finite Element Analysis of the Magneto-mechanical Coupling Due to Punching Process in Electrical Steel Sheet

dc.contributorAalto-yliopistofi
dc.contributorAalto Universityen
dc.contributor.authorM'zali, N.
dc.contributor.authorHenneron, T.
dc.contributor.authorBenabou, A.
dc.contributor.authorMartin, F.
dc.contributor.authorBelahcen, A.
dc.contributor.departmentUniversité de Lille
dc.contributor.departmentComputational Electromechanics
dc.contributor.departmentDepartment of Electrical Engineering and Automation
dc.date.accessioned2021-03-10T07:26:04Z
dc.date.available2021-03-10T07:26:04Z
dc.date.issued2021-06
dc.description.abstractIn this article, a finite element (FE) modeling of the punching effect on the magnetic properties of electrical steel sheet is carried out. For that, the modified anhysteretic Sablik model is applied together with the plastic strain distribution obtained from a punching process simulation performed using the software ABAQUS. First, a synchronous electrical machine is simulated including the effect of the punching process, and it shows the degradation of the magnetic flux density at the lamination edges and an increase of the iron losses. Then, results obtained from the magneto-mechanical simulation are investigated in terms of the method used to implement the plastic strain distribution in the FE computation. Two examples have been investigated: a square steel sheet and a tooth of an electrical machine.en
dc.description.versionPeer revieweden
dc.format.extent4
dc.format.mimetypeapplication/pdf
dc.identifier.citationM'zali , N , Henneron , T , Benabou , A , Martin , F & Belahcen , A 2021 , ' Finite Element Analysis of the Magneto-mechanical Coupling Due to Punching Process in Electrical Steel Sheet ' , IEEE Transactions on Magnetics , vol. 57 , no. 6 , 7401304 . https://doi.org/10.1109/TMAG.2021.3058310en
dc.identifier.doi10.1109/TMAG.2021.3058310
dc.identifier.issn0018-9464
dc.identifier.issn1941-0069
dc.identifier.otherPURE UUID: 20f8a9fd-8346-4de2-8903-bd0eea2254ca
dc.identifier.otherPURE ITEMURL: https://research.aalto.fi/en/publications/20f8a9fd-8346-4de2-8903-bd0eea2254ca
dc.identifier.otherPURE LINK: http://www.scopus.com/inward/record.url?scp=85100832029&partnerID=8YFLogxK
dc.identifier.otherPURE FILEURL: https://research.aalto.fi/files/56711712/ELEC_Mzali_etal_Finite_Element_Analysis_IEEETraMag_2021_acceptedauthormanuscript.pdf
dc.identifier.urihttps://aaltodoc.aalto.fi/handle/123456789/102942
dc.identifier.urnURN:NBN:fi:aalto-202103102228
dc.language.isoenen
dc.publisherIEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
dc.relation.ispartofseriesIEEE Transactions on Magneticsen
dc.rightsopenAccessen
dc.subject.keywordDegradation
dc.subject.keywordFinite element method
dc.subject.keywordMagneto-mechanical modeling
dc.subject.keywordMagnetomechanical effects
dc.subject.keywordPlastic strain distribution
dc.subject.keywordPlastics
dc.subject.keywordPunching
dc.subject.keywordPunching effect
dc.subject.keywordSaturation magnetization
dc.subject.keywordSteel
dc.subject.keywordStrain
dc.titleFinite Element Analysis of the Magneto-mechanical Coupling Due to Punching Process in Electrical Steel Sheeten
dc.typeA1 Alkuperäisartikkeli tieteellisessä aikakauslehdessäfi
dc.type.versionacceptedVersion
Files