Learning Centre

Combining Simulation and Optimisation for Dimensioning Optimal Building Envelopes and HVAC Systems

 |  Login

Show simple item record

dc.contributor Aalto-yliopisto fi
dc.contributor Aalto University en
dc.contributor.advisor Hasan, Ala, Dr., Aalto University, Finland
dc.contributor.author Hamdy, Mohamed
dc.date.accessioned 2013-01-25T09:30:37Z
dc.date.available 2013-01-25T09:30:37Z
dc.date.issued 2012
dc.identifier.isbn 978-952-60-4938-0 (electronic)
dc.identifier.isbn 978-952-60-4937-3 (printed)
dc.identifier.issn 1799-4942 (electronic)
dc.identifier.issn 1799-4934 (printed)
dc.identifier.issn 1799-4934 (ISSN-L)
dc.identifier.uri https://aaltodoc.aalto.fi/handle/123456789/7581
dc.description.abstract Responding to the international calls for high energy performance buildings like nearly-zero energy buildings (nZEB), recent years have seen significant growth in energy-saving and energy-supply measures in the building sector. A detailed look at the possible combinations of measures indicates that there could be a huge number (possibly millions) of candidate designs. In exploring this number of designs, looking for optimal ones is an arduous multi-objective design task. Buildings are required to be not only energy-efficient but also economically feasible and environmentally sound while adhering to an ever-increasing demand for better indoor comfort levels. The current thesis introduces suitable methods and techniques that attempt to carry out time-efficient multivariate explorations and transparent multi-objective analysis for optimizing such complex building design problems. The thesis’s experiences can be considered as seeds for developing a generic simulation-based optimisation design tool for high-energy-performance buildings. Case studies are made to illustrate the effectiveness of the introduced methods and techniques. In all the studies, IDA-ICE is used for simulation and MATLAB is implemented for optimisation as well as supplementary calculations. A new program (IDA-ESBO) is used to simulate renewable energy source systems (RESs). Using detailed simulation programs was important to investigate the impact of the energy-saving measures (ESMs) and the RESs as well as their effects on the thermal and/or energy performance of the studied buildings. The case studies yielded many optimal design concepts (e.g., the type of heating/cooling (H/C) system is a key element to achieve environmentally friendly buildings with minimum life cycle cost. The cost-optimal implementations of ESMs and RESs depend significantly on the installed H/C system). On building regulations, comments are taken. For instance, in line with the cost-optimal methodology framework of the European Energy Performance of Buildings Directive (EPBD-recast 2010), our study showed that the Finnish building regulation D3-2012 specifies minimum energy performance requirements for dwellings, lower than the estimated cost-optimal level by more than 15%. The adaptive thermal comfort criteria of the Finnish Society of Indoor Air Quality (FiSIAQ-2008) are strict and do not allow for energy-efficient solutions in standard office buildings. The thesis shows that it is technically possible to speed up the optimisation resolution of the building and HVAC design problems and to reach an optimal or close-to-optimal solution set. A simulation-based optimisation approach with a suitable problem setup and resolution algorithm can efficiently explore the possible combinations of design options and support informative, optimal results for decision-makers.  en
dc.format.extent 61 + app. 57
dc.format.mimetype application/pdf
dc.language.iso en en
dc.publisher Aalto University en
dc.publisher Aalto-yliopisto fi
dc.relation.ispartofseries Aalto University publication series DOCTORAL DISSERTATIONS en
dc.relation.ispartofseries 177/2012
dc.relation.haspart [Publication 1]: Mohamed Hamdy, Ala Hasan, Kai Sirén. (2009). Combination of optimization algorithms for a multi-objective building design problem. Building Simulation (BS2009), 11th International IBPSA Conference, Glasgow-UK.
dc.relation.haspart [Publication 2]: Mohamed Hamdy, Ala Hasan, Kai Sirén. (2011). Applying a multi-objective optimization approach for design of low-emission cost-effective dwellings. Building and Environment, 46 (1); pp. 109-123.
dc.relation.haspart [Publication 3]: Mohamed Hamdy, Ala Hasan, Kai Sirén. (2011). Impact of adaptive thermal comfort criteria on building energy use and cooling equipment size using a multi-objective optimization scheme. Energy and Buildings, 43 (9); pp. 2055–2067.
dc.relation.haspart [Publication 4]: Mohamed Hamdy, Ala Hasan, Kai Sirén. (2012). A Multi-stage optimization method for cost-optimal nearly-zero-energy building solutions in line with the EPBD-Recast 2010. Energy and Buildings. Energy and Buildings. Available online 29 August 2012.
dc.relation.haspart [Publication 5]: Mohamed Hamdy, Matti Palonen, Ala Hasan. (2012). Implementation of Pareto-Archive NSGA-II Algorithms to a nearly-Zero-Energy Building Optimization Problem. First Building Simulation and Optimization Conference (BSO12), IBPSA-England, Loughborough University, UK.
dc.subject.other Civil engineering en
dc.subject.other Energy en
dc.title Combining Simulation and Optimisation for Dimensioning Optimal Building Envelopes and HVAC Systems en
dc.type G5 Artikkeliväitöskirja fi
dc.contributor.school Insinööritieteiden korkeakoulu fi
dc.contributor.school School of Engineering en
dc.contributor.department Energiatekniikan laitos fi
dc.contributor.department Department of Energy Technology en
dc.subject.keyword building design en
dc.subject.keyword building envelopes en
dc.subject.keyword HVAC systems en
dc.subject.keyword transparent analysis systems en
dc.subject.keyword optimisation methods en
dc.subject.keyword algorithms en
dc.subject.keyword energy efficiency en
dc.identifier.urn URN:ISBN:978-952-60-4938-0
dc.type.dcmitype text en
dc.type.ontasot Doctoral dissertation (article-based) en
dc.type.ontasot Väitöskirja (artikkeli) fi
dc.contributor.supervisor Sirén, Kai, Prof., Aalto University, Finland
dc.opn Wright, Jonathan, Prof., Loughborough University, UK
dc.opn Hakanen, Jussi, Dr., University of Jyväskylä, Finland
dc.contributor.lab HVAC Technology en
dc.rev Wright, Jonathan, Prof., Loughborough University, UK
dc.rev Kalyanmoy, Prof., Indian Institute of Technology (IIT) Kanpur, India
dc.date.defence 2012-12-14

Files in this item

This item appears in the following Collection(s)

Show simple item record

Search archive

Advanced Search

article-iconSubmit a publication