Learning Centre

Development and analysis of road lighting : road surfaces and mesopic dimensioning

 |  Login

Show simple item record

dc.contributor Aalto-yliopisto fi
dc.contributor Aalto University en
dc.contributor.advisor Puolakka, Marjukka, Dr.
dc.contributor.author Ylinen, Anne-Mari
dc.date.accessioned 2012-09-04T09:48:03Z
dc.date.available 2012-09-04T09:48:03Z
dc.date.issued 2011
dc.identifier.isbn 978-952-60-4410-1 (PDF)
dc.identifier.isbn 978-952-60-4409-5 (printed)
dc.identifier.issn 1799-4942
dc.identifier.uri https://aaltodoc.aalto.fi/handle/123456789/5105
dc.description.abstract This work starts with a short introduction in which the energy consumption, proportion of different types of light sources, and procedures that have been introduced concerning energy saving in outdoor lighting are overviewed. It is followed by a historical review and research related to aspects of the topic referred to in this work: the luminance method used for photometric dimensioning of road lighting, road surface classification practises, and mesopic photometry. The work continues with a study of road surface reflection characteristics. Road surface reflection measurements were made to study the current state of the pavement materials used on Finnish roads. Pavement samples were extracted from roads and the reflection tables of the pavement samples were measured. The pavement materials used in Finland are somewhat dark and diffuse and the standard reflection tables give an adequate fit for the degree of specularity but not for the degree of lightness. The spectral reflection properties of various types and differently coloured pavement samples were studied. The results indicate that light sources that have a higher spectral light output in the longer wavelength region, such as high pressure sodium lamps, are more energy-efficient in terms of light reflected from the pavements compared to the ones with a high output in the short wavelength region. In addition, pavement materials made out of recycled materials and local limestone were studied. Light pavement materials reflect more light than darker pavement materials, and energy could be saved by increasing the spacing of the poles for the luminaires or reducing the power consumption of the luminaires. The work continues with a study of mesopic dimensioning in road lighting. The luminous efficacy of various types of luminaires and the use of mesopic dimensioning in road lighting design were studied. The study is followed by a case study where high pressure sodium lamp street lighting was changed to LED street lighting. The energy consumption of the installation was calculated and mesopic dimensioning was used. The results show that energy savings are possible when mesopic dimensioning is used by reducing the power consumption of the luminaire or by increasing the spacing of the poles for the luminaires. The work continues by studying the differences in using the standard r-tables and the measured r-tables of the pavement used in the road lightning design on Finnish roads. It was found that the R2 table should be used for road lighting design if the reflection property of the pavement is not known. The work is followed by a study of the use of light pavement materials and mesopic dimensioning. In this case the benefits of mesopic dimensioning are negligible when light pavement materials are used. en
dc.format.extent Verkkokirja (3452 KB, 70 s.)
dc.format.mimetype application/pdf
dc.language.iso en en
dc.publisher Aalto University en
dc.relation.ispartofseries Aalto University publication series DOCTORAL DISSERTATIONS , 134/2011 en
dc.relation.haspart [Publication 1]: Aleksanteri Ekrias, Anne-Mari Ylinen, Marjukka Eloholma, and Liisa Halonen. 2008. Effects of pavement lightness and colour on road lighting performance. In: Proceedings of the CIE International Symposium on Road Surface Photometric Characteristics: Measurement Systems and Results. Torino, Italy. 9-10 July 2008. 8 pages. © 2008 International Commission on Illumination (CIE). By permission. en
dc.relation.haspart [Publication 2]: Anne Ylinen, Marjukka Puolakka, and Liisa Halonen. 2010. Road surface reflection properties and applicability of the r-tables for today's pavement materials in Finland. Light & Engineering, volume 18, number 1, pages 78-90. © 2010 Znack Publishing House. By permission. en
dc.relation.haspart [Publication 3]: Anne-Mari Ylinen, Terhi Pellinen, Jarkko Valtonen, Marjukka Puolakka, and Liisa Halonen. 2011. Investigation of pavement light reflection characteristics. Road Materials and Pavement Design: an International Journal, volume 12, number 3, pages 587-614. © 2011 Lavoisier. By permission. en
dc.relation.haspart [Publication 4]: Anne Ylinen, Marjukka Puolakka, and Liisa Halonen. 2010. Impact of mesopic design on outdoor lighting energy efficiency. In: Proceedings of the CIE Conference on Lighting Quality & Energy Efficiency (CIE 2010). Vienna, Austria. 14-17 March 2010. 6 pages. ISBN 978-3-901-906-83-1. © 2010 International Commission on Illumination (CIE). By permission. en
dc.relation.haspart [Publication 5]: Anne-Mari Ylinen, Leena Tähkämö, Marjukka Puolakka, and Liisa Halonen. 2011. Road lighting quality, energy efficiency, and mesopic design – LED street lighting case study. LEUKOS, The Journal of the Illuminating Engineering Society of North America, volume 8, number 1, pages 9-24. © 2011 Illuminating Engineering Society of North America (IES). By permission. en
dc.relation.haspart [Publication 6]: Anne-Mari Ylinen, Grega Bizjak, Marjukka Puolakka, and Liisa Halonen. 2011. Road lighting practices and energy-efficiency – Slovenia and Finland. Ingineria Iluminatului - Lighting Engineering, volume 13, number 1, pages 29-44. © 2011 Technical University of Cluj-Napoca, Lighting Engineering Center and © 2011 Mediamira. By permission. en
dc.subject.other Transport engineering
dc.subject.other Electrical engineering
dc.title Development and analysis of road lighting : road surfaces and mesopic dimensioning en
dc.type G5 Artikkeliväitöskirja fi
dc.contributor.school Sähkötekniikan korkeakoulu fi
dc.contributor.department Elektroniikan laitos fi
dc.contributor.department Department of Electronics en
dc.subject.keyword road lighting en
dc.subject.keyword road surfaces en
dc.subject.keyword mesopic dimensioning en
dc.identifier.urn URN:ISBN:978-952-60-4410-1
dc.type.dcmitype text en
dc.type.ontasot Väitöskirja (artikkeli) fi
dc.type.ontasot Doctoral dissertation (article-based) en
dc.contributor.supervisor Halonen, Liisa, Prof.


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search archive


Advanced Search

article-iconSubmit a publication

Browse