Standstill self-commissioning of an induction motor drive

Mölsä, Eemeli; Tiitinen, Lauri; Saarakkala, Seppo; Peretti, Luca; Hinkkanen, Marko

Aaltodoc
→
6b Artikkelit / Articles from Research information portal
→
[article-cris] Sähkötekniikan korkeakoulu / ELEC
→
View Item

Standstill self-commissioning of an induction motor drive

Altmetrics



Title:	Standstill self-commissioning of an induction motor drive
Author(s):	Mölsä, Eemeli ; Tiitinen, Lauri ; Saarakkala, Seppo ; Peretti, Luca ; Hinkkanen, Marko
Date:	2020-10-11
Language:	en
Pages:	7 3044-3050
Department:	Electric Drives Department of Electrical Engineering and Automation KTH Royal Institute of Technology
ISBN:	978-1-7281-5826-6
Series:	Proceedings of the 12th IEEE Energy Conversion Congress and Exposition, ECCE 2020, IEEE Energy Conversion Congress and Exposition
ISSN:	2329-3721 2329-3748
DOI-number:	10.1109/ECCE44975.2020.9236035
Keywords:	Induction motor drives, Parameter identification, Saturation characteristics
» Show full item record
This publication is imported from Aalto University Research information portal: https://research.aalto.fi > View this publication in Research information portal > Other link related to publication (Research information portal) > View/Open full text file from Research information portal
Citation: Mölsä , E , Tiitinen , L , Saarakkala , S , Peretti , L & Hinkkanen , M 2020 , Standstill self-commissioning of an induction motor drive . in ECCE 2020 - IEEE Energy Conversion Congress and Exposition . , 9236035 , IEEE Energy Conversion Congress and Exposition , IEEE , pp. 3044-3050 , IEEE Energy Conversion Congress and Exposition , Virtual, Online , 11/10/2020 . https://doi.org/10.1109/ECCE44975.2020.9236035
Abstract: This paper deals with the parameter identification of an induction motor at standstill. A comprehensive identification procedure is analyzed, describing a robust flux-integration method for main-flux saturation characteristics and transient tests for rotor-side parameters. The influence of the main-flux saturation on the transient test results and on the identified rotor-side parameters is studied, and improvements are suggested. The identification procedure is validated by means of experiments using 2.2-kW and 5.6-kW induction motors.

Permanent link to this item: http://urn.fi/URN:NBN:fi:aalto-202011066360 Email this Export to RefWorks QR Code Print BibTex Tweet