Digital Spare Parts

 |  Login

Show simple item record

dc.contributor Aalto-yliopisto fi
dc.contributor Aalto University en
dc.contributor.author Salmi, Mika
dc.contributor.author Partanen, Jouni
dc.contributor.author Tuomi, Jukka
dc.contributor.author Chekurov, Sergei
dc.contributor.author Björkstrand, Roy
dc.contributor.author Huotilainen, Eero
dc.contributor.author Kukko, Kirsi
dc.contributor.author Kretzschmar, Niklas
dc.contributor.author Akmal, Jan
dc.contributor.author Jalava, Kalle
dc.contributor.author Koivisto, Satu
dc.contributor.author Vartiainen, Matti
dc.contributor.author Metsä-Kortelainen, Sini
dc.contributor.author Puukko, Pasi
dc.contributor.author Jussila, Ari
dc.contributor.author Riipinen, Tuomas
dc.contributor.author Reijonen, Joni
dc.contributor.author Tanner, Hannu
dc.contributor.author Mikkola, Markku
dc.date.accessioned 2018-03-05T10:02:48Z
dc.date.available 2018-03-05T10:02:48Z
dc.date.issued 2018
dc.identifier.isbn 978-952-60-3746-2 (electronic)
dc.identifier.uri https://aaltodoc.aalto.fi/handle/123456789/30189
dc.description Published by Aalto University and VTT Technical Research Centre of Finland.
dc.description.abstract Digital spare parts is a concept where the spare parts and the related manufacturing data are stored and transferred in digital form. The spare parts are manufactured using 3D printing according to need, usually close to the end user’s premises. The digitalisation of spare parts aims for a better, more flexible and quicker availability of spare parts, and lower storage, manufacturing and transport costs. The quicker delivery of spare parts can also reduce downtime, which can mean significant cost savings. It is essential in the digitalisation of the companies' spare parts to find the parts in the spare part libraries that bring the greatest benefit when they are stored in digital form and manufactured by 3D printing. Such parts include, in particular, parts of old equipment and machines and slowly circulating parts with complex geometries. Today, 3D printing can be used to manufacture high-performance pieces, and the method is excellently suited to the manufacturing of individual pieces or short-run batches; it also allows the improvement of the spare parts, with updated and intelligent spare parts as examples. Information on a company's spare parts is scattered between multiple systems, and manufacturing data in particular may be difficult to find. At the initial stage, it is important to identify the 3D printable parts in the spare part libraries and digitalise them, not only with regard to 3D models but all other manufacturing data from materials and tolerances to the required post-processing data. The digitalisation of spare parts requires 3D design competence, knowledge of the 3D printing processes, and familiarisation with the printable materials. Spare parts are rarely designed to be manufactured by 3D printing; on the other hand, the selection of 3D printable materials remains reasonably limited, due to which situations where a part is manufactured from a replacement material will likely occur. 3D printing processes produce their own kind of a structure and surface finish, due to which the post-processing of 3D printable parts, such as heat treatments and finishing, must be carefully chosen. The goal is that the properties of parts manufactured by 3D printing are at least as good as those of conventionally manufactured parts. The vision of the roadmap for digital spare parts presented in the report is that after ten years or so, 10% of spare parts are digital, and the manufacturing technology is reliable and is of a high quality. In other words, quality verification, the extension of the related material selection and the automation of processes are required of the 3D printing technologies. 3D printing creates new possibilities for the development of the operation of parts, equipment or entire processes. IDs and sensors can be embedded into 3D printed parts, allowing the tracking of their movement in the supply network and anticipatory condition monitoring. A spare part of the future will be able to automatically order a new part from a digital spare part library so that it can be replaced by the new part just at the right time before the machine breaks down or the process stops. en
dc.format.extent 67
dc.format.mimetype application/pdf en
dc.language.iso en en
dc.publisher Aalto University en
dc.publisher Aalto-yliopisto fi
dc.relation.hasversion Available also in Finnish. Julkaistu myös suomeksi: http://urn.fi/URN:ISBN:978-952-60-3745-5
dc.subject.other Computer science en
dc.subject.other Economics en
dc.subject.other Mechanical engineering en
dc.title Digital Spare Parts en
dc.type D4 Julkaistu kehittämis- tai tutkimusraportti tai -selvitys fi
dc.subject.keyword rapid prototyping en
dc.subject.keyword additive manufacturing en
dc.subject.keyword rapid manufacturing en
dc.identifier.urn URN:ISBN:978-952-60-3746-2
dc.type.dcmitype text en


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search archive


Advanced Search

article-iconSubmit a publication

Browse

My Account