Study of mechanical properties of cellulose reinforced ice

 |  Login

Show simple item record

dc.contributor Aalto-yliopisto fi
dc.contributor Aalto University en
dc.contributor.advisor Salokangas, Lauri
dc.contributor.advisor Baroudi, Djebar
dc.contributor.author Tabassum, Syda
dc.date.accessioned 2017-05-11T10:37:34Z
dc.date.available 2017-05-11T10:37:34Z
dc.date.issued 2017-05-08
dc.identifier.uri https://aaltodoc.aalto.fi/handle/123456789/26189
dc.description.abstract In arctic region, ice has been used as a building material for a long time. However, the strength of ice is not high enough to be used in structures where higher stresses occur. Besides this, due to high homologous temperature, creep is a dominating mechanical characteristic of ice. Therefore, strengthening of ice is necessary to build structures to stand higher stresses. The mechanical strength of ice can be improved by reinforcing it with some materials such as sawdust, wood pulp, cellulose, geo-grid, fibreglass and so on. In this thesis, mechanical properties of cellulose reinforced ice composites are examined thoroughly, and compared with the properties of pure ice. The mechanical properties included compressive strength, modulus of elasticity and creep behaviour. The newly developed ice composite has been named as 'cellcrete'. The experimental study included compression tests at three different strain rates and creep tests at two stress levels. Besides this, to find the optimal water to cellulose ratio, different mass fractions of cellulose were tried out. The temperature was, -10 ⁰C in both compression and creep tests. Preparation of specimens with given properties was also part of the study, specially for pure ice specimens. The whole experimental setup was constructed from the scratch and hence, pure ice specimens were tested as a reference. In the experiments, the accuracy was maintained as carefully as possible. The test results show that, adding cellulose in ice specimens improved the compressive strength and modulus of elasticity of ice composite compared to pure ice. The creep behaviour of cellcrete was also better compared to pure ice. Depending on strain rate (10-4 s-1 < ε ̇ < 10-2 s-1) the compressive strength of cellcrete varies from 4 to 12 MPa. Whereas, at the same strain rates, compressive strength of pure ice varies from 6 to 10 MPa. It can also be noticed that, cellcrete of various concentrations have 10 to 12 times lower creep rate than pure ice. Another observation was that, cellcrete specimens were more ductile compared to pure ice. Besides this, cellulose-ice composite has a natural white colour which would make structures look aesthetically better compared to other ice composites such as pykrete. en
dc.format.extent 54+11
dc.language.iso en en
dc.title Study of mechanical properties of cellulose reinforced ice en
dc.type G2 Pro gradu, diplomityö fi
dc.contributor.school Insinööritieteiden korkeakoulu fi
dc.subject.keyword cellcrete en
dc.subject.keyword cellulose en
dc.subject.keyword pure ice en
dc.subject.keyword creep rate en
dc.subject.keyword compressive strength en
dc.subject.keyword ductility en
dc.identifier.urn URN:NBN:fi:aalto-201705114710
dc.programme.major Structural Engineering fi
dc.programme.mcode ENG30309 fi
dc.type.ontasot Master's thesis en
dc.type.ontasot Diplomityö fi
dc.contributor.supervisor Paavola, Juha
dc.programme Master's Programme in Structural Engineering and Building Technology fi
dc.ethesisid Aalto 9102
dc.location P1


Files in this item

Files Size Format View

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record

Search archive


Advanced Search

article-iconSubmit a publication

Browse

My Account