Effect of Stress on Magnetic Properties of Electrical Steel Sheet and Core Losses in Electrical Machines

 |  Login

Show simple item record

dc.contributor Aalto-yliopisto fi
dc.contributor Aalto University en
dc.contributor.advisor Rasilo, Paavo, Asst. Prof., Tampere University of Technology, Tampere, Finland
dc.contributor.advisor Martin, Floran, Dr., Aalto University, Department of Electrical Engineering and Automation, Finland
dc.contributor.author Singh, Deepak
dc.date.accessioned 2017-01-04T10:00:35Z
dc.date.available 2017-01-04T10:00:35Z
dc.date.issued 2016
dc.identifier.isbn 978-952-60-7233-3 (electronic)
dc.identifier.isbn 978-952-60-7234-0 (printed)
dc.identifier.issn 1799-4942 (electronic)
dc.identifier.issn 1799-4934 (printed)
dc.identifier.issn 1799-4934 (ISSN-L)
dc.identifier.uri https://aaltodoc.aalto.fi/handle/123456789/24075
dc.description.abstract This dissertation deals with the effect of stress on the magnetic properties of electrical steel sheets and, consequently, on the flux density distribution and the core loss of electrical machines. The stress effect on the permeability and the iron loss is measured using a modified single sheet tester, designed and custom built with the provision of unidirectional in-plane stressing. The measured stress dependent permeability and the developed stress dependent iron loss model are implemented in a 2D finite element (FE) machine model to investigate the effect of stress due to the shrink-fit, and the centrifugal forces on the flux and loss density distributions across the cross-section of the machine. From the simultaneous magnetic and magnetostriction measurements, a comprehensive stress dependent magnetostriction model has been proposed and later used in the magneto-mechanical coupling term of the well known Sablik-Jiles-Atherton static hysteresis model. Some modifications to the model parameters and the coupling term have been proposed to correctly model the BH-loop variation over a wide range of stress, both compressive and tensile. Similarly, the model parameters of the statistical iron loss model are made stress dependent, over a wide range of frequency, induction and stress, for further use in the estimation of the core losses. Finally, the measured permeability and the developed iron loss model, both stress dependent, are implemented in a 2D FE model of a synchronous reluctance machine. The stress distribution across the machine geometry is obtained from the static linear elasticity analysis for the shrink-fit and the rotation, and is coupled to the magnetic field formulation through the stress dependent permeability. The obtained magnetic field distribution is used in conjunction with the stress dependent iron loss model to post process for the core losses. The results obtained from the FE simulation with the inclusion of stress show a substantial difference in both the flux density distribution across the machine geometry and the loss density distribution across the stator core, when compared to the FE simulation result without the stress. en
dc.format.extent 108 + app. 54
dc.format.mimetype application/pdf en
dc.language.iso en en
dc.publisher Aalto University en
dc.publisher Aalto-yliopisto fi
dc.relation.ispartofseries Aalto University publication series DOCTORAL DISSERTATIONS en
dc.relation.ispartofseries 280/2016
dc.relation.haspart [Publication 1]: Anouar Belahcen, Deepak Singh, Paavo Rasilo, Floran Martin, Setareh Gorji Ghalamestani, and Lieven Vandevelde. Anisotropic and strain-dependent model of magnetostriction in electrical steel sheets. IEEE Transactions on Magnetics, Vol. 51, No. 3, pp 1–4, March 2015. DOI: 10.1109/TMAG.2014.2361681
dc.relation.haspart [Publication 2]: Deepak Singh, Paavo Rasilo, Floran Martin, Anouar Belahcen, and Antero Arkkio. Effect of Mechanical Stress on Excess Loss of Electrical Steel Sheets. IEEE Transactions on Magnetics, Vol. 51, No. 11, pp 1–4, November 2015. Post-print version: http://urn.fi/URN:NBN:fi:aalto-201610054531. DOI: 10.1109/TMAG.2015.2449779
dc.relation.haspart [Publication 3]: Paavo Rasilo, Deepak Singh, Ugur Aydin, Floran Martin, Reijo Kouhia, Anouar Belahcen, and Antero Arkkio. Modeling of Hysteresis Losses in Ferromagnetic Laminations Under Mechanical Stress. IEEE Transactions on Magnetics, Vol. 52, No. 3, pp 1–4, March 2016. Post-print version: http://urn.fi/URN:NBN:fi:aalto-201605021901. DOI: 10.1109/TMAG.2015.2468599
dc.relation.haspart [Publication 4]: Deepak Singh, Floran Martin, Paavo Rasilo and Anouar Belahcen. Magneto-Mechanical Model for Hysteresis in Electrical Steel Sheet. IEEE Transactions on Magnetics, Vol. 52, No. 11, pp 1–9, November 2016. Post-print version: http://urn.fi/URN:NBN:fi:aalto-201610054532. DOI: 10.1109/TMAG.2016.2590384
dc.relation.haspart [Publication 5]: Floran Martin, Deepak Singh, Ugur Aydin, Laurent Daniel, Laurent Bernard, Paavo Rasilo, and Anouar Belahcen. Magneto-Mechanical Analysis of an Axially Laminated Synchronous Reluctance Machine. In Proceedings of the XXII International Conference on Electrical Machines (ICEM’2016), pp 1861-1867, Lausanne, Switzerland, September, 2016. DOI: 10.1109/ICELMACH.2016.7732777
dc.relation.haspart [Publication 6]: Deepak Singh, Floran Martin, Paavo Rasilo and Anouar Belahcen. Modeling of Stator Core Loss in a Synchronous Reluctance Machine with Shrink-fit. IEEE Transactions on Magnetics, Submitted, pages 1–8, October, 2016. DOI: 10.1109/TMAG.2015.2435701
dc.subject.other Electrical engineering en
dc.title Effect of Stress on Magnetic Properties of Electrical Steel Sheet and Core Losses in Electrical Machines en
dc.type G5 Artikkeliväitöskirja fi
dc.contributor.school Sähkötekniikan korkeakoulu fi
dc.contributor.school School of Electrical Engineering en
dc.contributor.department Sähkötekniikan ja automaation laitos fi
dc.contributor.department Department of Electrical Engineering and Automation en
dc.subject.keyword finite-element method en
dc.subject.keyword hysteresis en
dc.subject.keyword iron loss en
dc.subject.keyword magnetostriction en
dc.subject.keyword magneto-mechanical en
dc.subject.keyword magnetic measurement en
dc.subject.keyword stress en
dc.subject.keyword single sheet tester en
dc.subject.keyword synchronous reluctance machine en
dc.identifier.urn URN:ISBN:978-952-60-7233-3
dc.type.dcmitype text en
dc.type.ontasot Doctoral dissertation (article-based) en
dc.type.ontasot Väitöskirja (artikkeli) fi
dc.contributor.supervisor Belahcen, Anouar, Prof., Aalto University, Electrical Machines, Finland
dc.opn Soulard, Juliette, Assoc. Prof., University of Warwick, Coventry, UK
dc.contributor.lab Research Group of Electromechanics en
dc.rev Krings, Andreas, Dr., ABB Corporate Research, Sweden
dc.rev Somkun, Sakda, Asst. Prof., Naresuan University, Phitsanulok, Thailand
dc.date.defence 2017-01-19

Files in this item

This item appears in the following Collection(s)

Show simple item record

Search archive

Advanced Search

article-iconSubmit a publication


My Account