[work] Insinööritieteiden korkeakoulu / ENG
Permanent URI for this collectionhttps://aaltodoc.aalto.fi/handle/123456789/55
Browse
Browsing [work] Insinööritieteiden korkeakoulu / ENG by Issue Date
Now showing 1 - 20 of 65
- Results Per Page
- Sort Options
- Diagonalization of the Reynold's equation by using enthalphy e and density ρ
Helsinki University of Technology | J Muu elektroninen julkaisu(1995) Rautaheimo, PatrikAbstract: This paper presents an improved method to upwind the Euler part of the uxes with the Reynolds-stress closure model. This new method takes account the anisotropic nature of the Reynolds-stresses. Method uses information of the production of the kinetic energy of turbulence. Resulting eigenvalues shows effect of the anisotropy. The characteristic variables and the right eigenvector matrix are relatively complex. Main result: Possible equations for upwinding. - Automatic CFD input decomposition for massively parallel systems
Helsinki University of Technology | J Muu elektroninen julkaisu(1995) Salminen, EsaAbstract: This memorandum describes a computer program which divides CFD grids into smaller blocks and updates the boundary condition information and the flow solver control data accordingly. The program is designed to be used in conjunction with FINFLO flow solver. Main result: Computer program divp3d. - Simplified of time averaged Navier-Stokes equations and Reynold's stress equations for an implicit sweep
Helsinki University of Technology | J Muu elektroninen julkaisu(1995) Rautaheimo, PatrikAbstract: This paper presents an improved method of upwind the Euler part of the uxes with the Reynolds-stress closure model. This new method takes account the anisotropic nature of the Reynolds-stresses. Resulting eigenvalues show effect of the anisotropy. Because the characteristic variables and the right eigenvector matrix are relatively complex, a simplified diagonalization is introduced. Main result: Possible equations for upwinding. - Liukuvan hilan reunaehdon implementointi FINFLOon
Helsinki University of Technology | J Muu elektroninen julkaisu(1996) Salminen, EsaTiivistelmä: Pyörivissä koneissa esiintyy tyypillisesti roottori-staattori-tyyppisiä ratkaisuja, joiden käsittely numeerisissa virtaussimuloinneissa edellyttää reunaehtojen päivittämistä myös tilanteissa, joissa laskentakopit eivät ole tarkasti kohdakkain. Tällaista reunaehtoa nimitetään liukuvaksi hilaksi (sliding mesh). Tässä muistiossa kuvataan liukuvan hilan reunaehdon implementointi FINFLO-virtausratkaisijaan. Pääkohdat: FINFLOon uusi aliohjelma SLD/SLIMES (noin 900 riviä). - IFRF polttokammion laskenta k-ε turbulenssimallilla, case 11
Helsinki University of Technology | J Muu elektroninen julkaisu(1996) Ojala, JuhaTiivistelmä: Tämän laskennan tarkoituksena on tutkia FINFLO:n k-ε turbulenssimallin soveltuvuutta voimakkaasti pyörivän ilman virtauksen laskentaan polttokammiossa. Vertailuarvoina on voitu käyttää mittaustuloksia sekä muilla tietokoneohjelmilla saatuja ratkaisuja. Voimakkaasti pyörivä virtaus asettaa suuret vaatimukset numeeriselle laskennalle, koska virtauskentässä esiintyy suuria nopeusgradientteja. Tällöin turbulenssin mallinnuksella on ratkaiseva merkitys lopputuloksiin. Pääkohdat: Nopeusjakaumat viidessä leikkauksessa, takaisinvirtausalue (Internal Recirculation Zone, IRZ). - Pumppukäyrän konstruointi Ahlströmin pumpulle
Helsinki University of Technology | J Muu elektroninen julkaisu(1996) Ojala, JuhaTiivistelmä: Tämän laskennan tarkoituksena on tutkia Ahlströmin keskipakopumpun nostokorkeuden riippuvuutta massavirrasta. Tuloksista voidaan konstruoida pumppukäyrä eli pumpun nostokorkeus massavirran funktiona. Pääkohdat: Pumppukäyrä. - Transportation of FINFLO to CRAY T3D
Helsinki University of Technology | J Muu elektroninen julkaisu(1996) Rautaheimo, PatrikAbstract: Explanation of the implementation of FINFLO to the CRAY T3D and also report the benchmark results. Main result: Benchmark runs in CRAY T3D. - Test Calculations of Various Two-Equation Low Reynolds Number Turbulence Models
Helsinki University of Technology | J Muu elektroninen julkaisu(1996) Rautaheimo, PatrikAbstract: Purpose of this work is compare different two-equation low Reynolds number turbulence model and their suitability to the different flow situations. There is comparison of old Chien k- ε model, cross-diffusion model and Gatski et al. ARSM. Flow simulations are applied for low Reynolds number channel flow, flow over flat plate, wall jet and curved duct. Main result: Implementation of the different turbulence models. - Liukuvan hilan reunaehdon testaus - Krainin impelleri
Helsinki University of Technology | J Muu elektroninen julkaisu(1997) Salminen, EsaTiivistelmä: FINFLOon implementoitua liukuvan hilan reunaehtoa testataan laskemalla suurella nopeudella pyörivää kompressoria. Testitapaukseksi valitaan Krainin impellerin perusgeometria, jossa ei ole mallitettu siipien kärkirakoa eikä staattorin siipiä. Impelleristä on mallitettu vain yksi siipisola (15°), joka kuvaa 1/24 koko siipipyörästä. Sliding-pinta sijoitetaan roottorin siipien jättöreunan ja kuviteltujen staattorin siipien johtoreunan väliin jäävään kapeaan vyöhykkeeseen. Tämä kohta on reunaehdon päivittämisen kannalta vaikea, mutta vastaa käytännön tilannetta. Simulointi tehdään ajasta riippumattomana siten, että roottoria on käännetty staattoriin nähden 10°. Vertailuajo tehdään käyttäen tavallista lohkoliimausreunaehtoa ja siten, että roottori ja staattori ovat kohdakkain. Uutta reunaehtoa testataan samassa tilanteessa myös modifioituna siten, että kaikki suureet kehän suuntaisilla koppiriveillä lasketaan keskiarvoina kaikkien kyseisen koppirivin koppien arvoista. Pääkohdat: Virtauskenttä on kohtuullisen hyvin jatkuva rajapinnan yli. - Implementation of the compressibility effect in to dissipation equation of a two equation turbulence model
Helsinki University of Technology | J Muu elektroninen julkaisu(1997) Rautaheimo, PatrikAbstract: In the k-ε turbulence model the effect of compressibility is generally neglected and an incompressible version of the model is used. However, with high Mach numbers results can be improved by a compressible dissipation. Main result: Correction term owing to compressibility to the turbulent dissipation rate. - ZGRID User Guide
Helsinki University of Technology | J Muu elektroninen julkaisu(1997) Ala-Juusela, JuhaveikkoAbstract: User guide for ZGRID. ZGRID is a grid generation program for two-dimensional single jets. Includes general instructions and an example of use. - Pipeflow manual
Helsinki University of Technology | J Muu elektroninen julkaisu(1997) Ojala, JuhaMain result: a Program for pipe flow calculations. - GRV-60 Impeller with airfoil-type and unvaned diffusor
Helsinki University of Technology | J Muu elektroninen julkaisu(1997) Heiska, HarriAbstract: Reynolds averaged Navier-Stokes (RANS) calculations are performed for the GRV-60 radial impeller with an airfoil-type and an unvaned diffusor. For the the airfoil-type aerodynamic diffusor design and off-design conditions are investigated at N = 14000 RPM. Design conditions are investigated at N = 16000 RPM. For the unvaned diffusor design conditions are studied at N = 16000 RPM. Measured total pressure ratios π tot;16 and isentropic efficiency values ηi;16 in [4] are compared with the calculated values. The results are in good agreement with measurements. - Suutinvirtauksen nopeusprofiilin vaikutus mallinnettaessa kaksiulotteista suihkua
Helsinki University of Technology | J Muu elektroninen julkaisu(1997) Ala-Juusela, JuhaveikkoTiivistelmä: Tässä muistiossa esitetään totuudenmukaisempien suutinvirtauksen nopeusprofiilin ja turbulenssiarvojen vaikutus vapaan kaksiulotteisen suihkun CFD-mallinnuksessa saataviin tuloksiin. - Description of the numerical methodology for the ercoftac test case F3
Helsinki University of Technology | J Muu elektroninen julkaisu(1997) Rautaheimo, Patrik; Ojala, JuhaAbstract: The purpose of thies work is to compare different low-Reynolds-number turbulence models and their suitability for the highly three dimensional return channel with a deswirl cascade. A comparison is made between Chien's k-ε model, Chien's model with a rotational correction, Gatski et al. ARSM and the full Reynolds stress model by Speziale et al. Experiments are provided by Concepts ETI. - Description of the numerical methodology for the ercoftac test case F3
Helsinki University of Technology | J Muu elektroninen julkaisu(1997) Rautaheimo, Patrik; Ojala, JuhaAbstract: The purpose of this work is to compare different low-Reynolds-number turbulence models and their suitability for the highly three dimensional return channel with a deswirl cascade. A comparison is made between Chien's k-ε model, Chien's model with a rotational correction, Gatski et al. ARSM and the full Reynolds stress model by Speziale et al. Experiments are provided by Concepts ETI. Main result: Results for the test case F3 in the ERCOFTAC Workshop on Turbomachinery Flow Predictions VI. - Kirjallisuuskatsaus kokoonpuristumattoman virtauksen ratkaisemisesta limittämättömässä hilassa
Helsinki University of Technology | J Muu elektroninen julkaisu(1997) Miettinen, AriTiivistelmä: Työ on katsaus artikkeleihin, joissa käsitellään kokoonpuristumattoman virtauksen ratkaisemista limittämättömissä hiloissa. Pääpaino on painekorjaukseen perustuvissa menetelmissä. Päätarkoituksena on ollut selvittää solun pintanopeuden laskennassa käytettyjä menetelmiä. Lisäksi kustakin artikkelista on selvitetty konvektion diskretointi, koordinaatiston valinta, muuttujien valinta, muuttujien päivitys, ja yhtälöiden välinen kytkentä. - Flow Simulation of a Centrifugal Process Pump
Helsinki University of Technology | J Muu elektroninen julkaisu(1997) Ojala, JuhaAbstract: The main object of these calculations is the industrial evaluation of a FINFLO flow solver using a low-Reynolds number k-ε and Reynolds stress turbulence models with a rotation correction. The results from the k-ε simulations are good whereas the Reynolds stress model has problems in numerical stability and convergence. Main result: A pump grid for low-Reynolds number turbulence models was made. After that various cases were simulated using a Reynolds Stress model and a low-Reynolds number k-ε turbulence model with a rotation correction. - A comparison of complete vs. simplifed viscous terms in boundary layer flow and lid-driven cavity flow
Helsinki University of Technology | J Muu elektroninen julkaisu(1997) Majander, PetriAbstract: Viscous terms are derived in curved co-ordinates using finite volume formulation. An approximation in common use called Thin Shear Layer approximation is derived. Turbulent flow over a flat plate with a k- ε-model as well as a laminar lid-driven flow are computed and the results are compared between the full viscous terms and the TSL approximation. Main result: An implementation of full viscous terms in FINFLO solver. - Pyörimisliikekorjaus k-ε-turbulenssimalliin
Helsinki University of Technology | J Muu elektroninen julkaisu(1997) Ojala, JuhaTiivistelmä: Tässä muistiossa esitetään FINFLO-virtausratkaisijassa olevaan k-ε-turbulenssimalliin tehty modikaatio pyörimisliikkeen huomioimiseksi. Pääkohdat: Pyörimisliikkeen huomiointi k-ε-turbulenssimalliin.