Browsing by Author "Wang, Yiwu"

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    3D personal navigation in smart phone using geocoded images
    (2011) Wang, Yiwu; Chen, Ruizhi; Maanmittaustieteiden laitos; Insinööritieteiden korkeakoulu; School of Engineering; Virrantaus, Kirsi
    The research of three-dimensional personal navigation in smart phone is more and more popular nowadays. Such kind of 3D navigation applications are mostly based on 3D model constructed in the computer, then importing the model to the mobile phone. Comparing with computer, the mobile devices typically have the bottlenecks of weaker CPU, less memory, lower bus bandwidth and limited power supply. The thesis presents a new solution to mitigate these technical restrictions of 3D model visualization in smart phone and achieve a better performance. The thesis is based on the project of "3D Personal Navigation and Location-Based Service for World Exposition 2010" funded by TEKES, replacing 3D visualization model engine with geocoded images searching engine in smart phone. The research delivers a 3D personal navigation software running in a Nokia 6710 handset. The major difference of the proposed solution with other similar 3D mobile navigation solutions and the previous 3D PN application is the visualization engine, which is based on geocoded images, rather than the developed projects on the basis of 3D model. The research generates a topological network and landmark database, and geocodes images snatching from 3D model which is constructed on computer. The system implements the functions of navigation in querying, routing and map matching, and develops the visualization search-engine for the geocoded images. To honestly evaluate the performance and improvement of the proposed solution several tests are carried out in the area of Tapiola, Espoo, Finland, including a field test to evaluate the positioning accuracy and the real-time performance, and a consumption test to prove the low cost of system. The proposed solution costs lower power consumption, CPU and memory, in higher refreshing rate,and have better visualization performance as well. In addition, this solution provides an optional way to decrease labour and working time to build up a similar solution by using real photos instead of complex 3D model construction.
  • Thumbnail Image
    Item
    The accuracy comparison of three simultaneous localization and mapping (SLAM)-based indoor mapping technologies
    (2018-10-01) Chen, Yuwei; Tang, Jian; Jiang, Changhui; Zhu, Lingli; Lehtomäki, Matti; Kaartinen, Harri; Kaijaluoto, Risto; Wang, Yiwu; Hyyppä, Juha; Hyyppä, Hannu; Zhou, Hui; Pei, Ling; Chen, Ruizhi; Department of Built Environment; MeMo; Wuhan University; Finnish Geospatial Research Institute; Shanghai Jiao Tong University
    The growing interest and the market for indoor Location Based Service (LBS) have been drivers for a huge demand for building data and reconstructing and updating of indoor maps in recent years. The traditional static surveying and mapping methods can’t meet the requirements for accuracy, efficiency and productivity in a complicated indoor environment. Utilizing a Simultaneous Localization and Mapping (SLAM)-based mapping system with ranging and/or camera sensors providing point cloud data for the maps is an auspicious alternative to solve such challenges. There are various kinds of implementations with different sensors, for instance LiDAR, depth cameras, event cameras, etc. Due to the different budgets, the hardware investments and the accuracy requirements of indoor maps are diverse. However, limited studies on evaluation of these mapping systems are available to offer a guideline of appropriate hardware selection. In this paper we try to characterize them and provide some extensive references for SLAM or mapping system selection for different applications. Two different indoor scenes (a L shaped corridor and an open style library) were selected to review and compare three different mapping systems, namely: (1) a commercial Matterport system equipped with depth cameras; (2) SLAMMER: a high accuracy small footprint LiDAR with a fusion of hector-slam and graph-slam approaches; and (3) NAVIS: a low-cost large footprint LiDAR with Improved Maximum Likelihood Estimation (IMLE) algorithm developed by the Finnish Geospatial Research Institute (FGI). Firstly, an L shaped corridor (2nd floor of FGI) with approximately 80 m length was selected as the testing field for Matterport testing. Due to the lack of quantitative evaluation of Matterport indoor mapping performance, we attempted to characterize the pros and cons of the system by carrying out six field tests with different settings. The results showed that the mapping trajectory would influence the final mapping results and therefore, there was optimal Matterport configuration for better indoor mapping results. Secondly, a medium-size indoor environment (the FGI open library) was selected for evaluation of the mapping accuracy of these three indoor mapping technologies: SLAMMER, NAVIS and Matterport. Indoor referenced maps were collected with a small footprint Terrestrial Laser Scanner (TLS) and using spherical registration targets. The 2D indoor maps generated by these three mapping technologies were assessed by comparing them with the reference 2D map for accuracy evaluation; two feature selection methods were also utilized for the evaluation: interactive selection and minimum bounding rectangles (MBRs) selection. The mapping RMS errors of SLAMMER, NAVIS and Matterport were 2.0 cm, 3.9 cm and 4.4 cm, respectively, for the interactively selected features, and the corresponding values using MBR features were 1.7 cm, 3.2 cm and 4.7 cm. The corresponding detection rates for the feature points were 100%, 98.9%, 92.3% for the interactive selected features and 100%, 97.3% and 94.7% for the automated processing. The results indicated that the accuracy of all the evaluated systems could generate indoor map at centimeter-level, but also variation of the density and quality of collected point clouds determined the applicability of a system into a specific LBS.
  • Thumbnail Image
    Item
    Feasibility Study of Using Mobile Laser Scanning Point Cloud Data for GNSS Line of Sight Analysis
    (2017) Chen, Yuwei; Zhu, Lingli; Tang, Jian; Pei, Ling; Kukko, Antero; Wang, Yiwu; Hyyppä, Juha; Hyyppä, Hannu; Finnish Geospatial Research Institute; Wuhan University; Shanghai Jiao Tong University; MeMo; Department of Built Environment
    The positioning accuracy with good GNSS observation can easily reach centimetre level, supported by advanced GNSS technologies. However, it is still a challenge to offer a robust GNSS based positioning solution in a GNSS degraded area. The concept of GNSS shadow matching has been proposed to enhance the GNSS based position accuracy in city canyons, where the nearby high buildings block parts of the GNSS radio frequency (RF) signals. However, the results rely on the accuracy of the utilized ready-made 3D city model. In this paper, we investigate a solution to generate a GNSS shadow mask with mobile laser scanning (MLS) cloud data. The solution includes removal of noise points, determining the object which only attenuated the RF signal and extraction of the highest obstruction point, and eventually angle calculation for the GNSS shadow mask generation. By analysing the data with the proposed methodology, it is concluded that the MLS point cloud data can be used to extract the GNSS shadow mask after several steps of processing to filter out the hanging objects and the plantings without generating the accurate 3D model, which depicts the boundary of GNSS signal coverage more precisely in city canyon environments compared to traditional 3D models.