Browsing by Author "Iurchenkova, Anna A."

Now showing 1 - 3 of 3

Comparative Study of the Structural Features and Electrochemical Properties of Nitrogen-Containing Multi-Walled Carbon Nanotubes after Ion-Beam Irradiation and Hydrochloric Acid Treatment
(2021-09) Korusenko, Petr M.; Nesov, Sergey N; Iurchenkova, Anna A.; Fedorovskaya, Ekaterina O.; Bolotov, Valery V.; Povoroznyuk, Sergey N.; Smirnov, Dmitry A.; Vinogradov, Alexander S.
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
Using a set of microscopic, spectroscopic, and electrochemical methods, a detailed study of the interrelation between the structural and electrochemical properties of the as-prepared nitrogen-containing multi-walled carbon nanotubes (N-MWCNTs) and their modified derivatives is carried out. It was found that after treatment of nanotubes with hydrochloric acid, their structure is improved by removing amorphous carbon from the outer layers of N-MWCNTs. On the contrary, ion bombardment leads to the formation of vacancy-type structural defects both on the surface and in the bulk of N-MWCNTs. It is shown that the treated nanotubes have an increased specific capacitance (up to 27 F·g-1) compared to the as-prepared nanotubes (13 F·g-1). This is due to an increase in the redox capacitance. It is associated with the reversible Faraday reactions with the participation of electrochemically active pyridinic and pyrrolic nitrogen inclusions and oxygen-containing functional groups (OCFG). Based on the comparison between cyclic voltammograms of N-MWCNTs treated in HCl and with an ion beam, the peaks on these curves were separated and assigned to specific nitrogen inclusions and OCFGs. It is shown that the rate of redox reactions with the participation of OCFGs is significantly higher than that of reactions with nitrogen inclusions in the pyridinic and pyrrolic forms. Moreover, it was established that treatment of N-MWCNTs in HCl is accompanied by a significant increase in the activity of nitrogen centers, which, in turn, leads to an increase in the rate of redox reactions involving OCFGs. Due to the significant contribution of redox capacitance, the obtained results can be used to develop supercapacitors with increased total specific capacitance.
Electrochemical properties of nitrogen and oxygen doped reduced graphene oxide
(2020-01-01) Hartmann, Sean J.; Iurchenkova, Anna A.; Kallio, Tanja; Fedorovskaya, Ekaterina O.
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
Carbon nanostructures are promising electrode materials for energy storage devices because of their unique physical and chemical properties. Modification of the surface improves the electrochemical properties of those materials because of the changes in morphology, diffusion properties, and inclusion of additional contributions to redox processes. Oxygen-containing functional groups and nitrogen doped into the carbon matrix significantly contribute to the electrochemical behavior of reduced graphite oxide (RGO). In this work, RGO was synthesized during hydrothermal treatment of graphite oxide with a hydrazine sulfate aqueous solution. Different amounts of hydrazine sulfate were used to synthesize RGO with different nitrogen contents in the structure, and the same synthesis conditions made it possible to obtain a material with a similar composition of oxygen-containing functional groups. The materials with different nitrogen concentrations and similar amounts of oxygen were compared as electrode materials for a supercapacitor and as a negative electrode material for a Li-ion battery. It was shown that the presence of oxygen-containing functional groups has the greatest influence on the behavior and efficiency of supercapacitor electrode materials, while nitrogen atoms embedded in the graphene lattice play the largest role in lithium intercalation.
Flexible supercapacitors based on free-standing polyaniline/single-walled carbon nanotube films
(2022-09-01) Panasenko, Iurii V.; Bulavskiy, Mikhail O.; Iurchenkova, Anna A.; Aguilar-Martinez, Yenanny; Fedorov, Fedor S.; Fedorovskaya, Ekaterina O.; Mikladal, Bjørn; Kallio, Tanja; Nasibulin, Albert G.
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
Advances in supercapacitor performance are boosted both by material design helping to improve specific capacitance and by tailoring of device architecture, often addressing flexibility to enable rolling-up packaging to reach high nominal values. This keeps attention to flexible lightweight materials, such as single-walled carbon nanotubes (SWCNTs), and conducting polymers, such as polyaniline (PANI). In this work, we design and study unique “dead-weight” free supercapacitors based on PANI electrochemically deposited on free-standing SWCNT films. Depending on the carbon nanotube film characteristics, we adjusted polymer inclusion into the nanotube films and evaluated its structure by TEM, SEM, XPS and Raman spectroscopy. Electrochemical methods were used to investigate the relationship between the morphology of initial SWCNT films, deposited PANI, and the electrochemical properties of the composite materials, including specific gravimetric capacitance and self-discharge processes. We show that thin free-standing films of SWCNTs with deposited PANI are less prone to self-discharge due to higher resistance arising from the lower density of the nanotubes in the film. Yet, such films enable better and more uniform deposition allowing to reach the maximum gravimetric capacitance value of 541 F g−1. This synergistic performance allows the creation of an electrode material for flexible ultra-light and powerful supercapacitors.